Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. परिचय

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. महत्त्वपूर्ण सुरक्षा जानकारी

आगो, बिजुलीको झट्का, वा व्यक्तिगत चोटपटकको जोखिम कम गर्न, सधैं यी आधारभूत सुरक्षा सावधानीहरू पालना गर्नुहोस्:

• चेतावनी: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• सबै विद्युतीय जडानहरू स्थानीय संहिता, अध्यादेश, वा राष्ट्रिय विद्युतीय संहिता (NEC) अनुसार हुनुपर्छ। यदि तपाईं उचित विद्युतीय तार जडानहरूसँग अपरिचित हुनुहुन्छ भने एक योग्य इलेक्ट्रीशियनसँग परामर्श गर्नुहोस्।
• यो फिक्स्चर भित्री प्रयोगको लागि मात्र हो।
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• फुट्नबाट जोगाउन काँचका भागहरूलाई सावधानीपूर्वक ह्यान्डल गर्नुहोस्।
• प्रस्ताव ६५ चेतावनी: यस उत्पादनमा क्यालिफोर्निया राज्यलाई क्यान्सर र जन्म दोष वा अन्य प्रजनन हानि निम्त्याउने रसायन हुन सक्छ।

3. प्याकेज सामग्री

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

समावेश अवयवहरू:

• Mounting strap for outlet box
• माउन्टिङ हार्डवेयर (स्क्रू, तार नट)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• सजावटी फाइनल
• स्थापना निर्देशन पाना

Note: Light bulbs are not included and must be purchased separately.

4. स्थापना निर्देशनहरू

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. पावर बन्द गर्नुहोस्: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. माउन्टिङ तयार गर्नुहोस्: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. तार जडानहरू: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box.
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   सुनिश्चित गर्नुहोस् कि सबै जडानहरू सुरक्षित छन्।
4. Mount Fixture Body: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. लाइट बल्बहरू स्थापना गर्नुहोस्: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. गिलासको छाया जोड्नुहोस्: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. पुनर्स्थापना पावर: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• अन/अफ: बत्ती बाल्न वा बन्द गर्न जडान गरिएको भित्ता स्विच प्रयोग गर्नुहोस्।
• मन्द गर्दै: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. मर्मतसम्भार

नियमित मर्मतसम्भारले तपाईंको बत्ती फिक्स्चरको उपस्थिति र कार्यक्षमता जोगाउन मद्दत गर्नेछ।

• सरसफाई: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• बल्ब प्रतिस्थापन:
  1. Turn off the power to the fixture at the circuit breaker.
  2. गिलासको छायाको तल रहेको सजावटी फिनियललाई ध्यानपूर्वक खोल्नुहोस्।
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. फिक्स्चरमा शक्ति पुनर्स्थापना गर्नुहोस्।

T. समस्या निवारण

यदि तपाईंको फिक्स्चर सही तरिकाले काम गरिरहेको छैन भने, सामान्य समस्या र समाधानहरूको लागि निम्न तालिका हेर्नुहोस्:

8. उत्पादन निर्दिष्टीकरण

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

चित्र 5: क्लोज-अप view of the brushed nickel finial at the base of the glass shade.

चित्र 6: क्लोज-अप view of the brushed nickel rim of the fixture.

9. वारेन्टी जानकारी

यो प्रोग्रेस लाइटिङ फिक्स्चरलाई a द्वारा समर्थित छ १ वर्ष सीमित वारेन्टी. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. ग्राहक समर्थन

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Store: स्टोरमा जानुहोस्