1. परिचय
This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Clear-Com CC-400-X4 Double-Ear Headset. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. उत्पादन समाप्तview
The Clear-Com CC-400 double-ear headset is engineered for high-quality audio communication. It features headphones designed for high ambient-noise attenuation and a hyper-cardioid dynamic microphone. The headset's flexible design and soft ear-pads contribute to user comfort. The microphone boom can rotate 300 degrees, which also functions as an On/Off switch for quick microphone muting.

Image 2.1: Clear-Com CC-400-X4 Double-Ear Headset. This image displays the Clear-Com CC-400-X4 double-ear headset. It features large, circumaural earcups designed for noise attenuation, an adjustable headband, and a flexible microphone boom arm extending from the left earcup. The microphone is a hyper-cardioid dynamic type. A 4-pin female XLR connector is visible at the end of the headset cable.
3. सेटअप
३.१ हेडसेट जडान गर्दै
- Locate the 4-pin female XLR connector on the headset cable.
- Connect the 4-pin female XLR connector of the headset cable to the corresponding male XLR port on your intercom system or audio device. Ensure the connection is secure.
४.२ आरामको लागि समायोजन
- Adjust the headband for a secure yet comfortable fit on your head.
- Position the earcups over both ears, ensuring they fully enclose your ears for optimal sound isolation and comfort.
- Adjust the flexible microphone boom arm so the microphone is positioned approximately 1 to 2 inches from your mouth.
4. सञ्चालन निर्देशनहरू
4.1 Microphone Activation and Muting
- The microphone is activated or muted by rotating the boom arm.
- म्यूट गर्न: Rotate the microphone boom arm upwards, away from your mouth.
- सक्रिय गर्न: Rotate the microphone boom arm downwards, towards your mouth.
- The boom arm has a 300-degree rotation range for this function.
५.३ अडियो अनुगमन
- Ensure your audio device or intercom system is properly configured for audio output to the headset.
- Adjust volume levels on your connected device as needed for comfortable listening.
5. मर्मतसम्भार
८.१ सरसफाई
- To clean the headset's exterior, use a soft, dry cloth.
- For the soft ear-pads, a slightly damp cloth with a mild soap solution can be used. Ensure no moisture enters the earcup components. Allow the ear-pads to air dry completely before using the headset.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the headset's finish and materials.
5.2 भण्डारण
- Store the headset in a clean, dry environment away from direct sunlight and extreme temperatures.
- Avoid wrapping the cable tightly around the headset, as this can cause stress and damage to the cable over time.
T. समस्या निवारण
७.१ अडियो आउटपुट छैन
- जडानहरू जाँच गर्नुहोस्: Ensure all cable connections, especially the 4-pin XLR connector, are fully and securely seated in their respective ports.
- भोल्युम सेटिङहरू: Verify that the volume levels on your connected intercom system or audio device are not muted and are set to an audible level.
- उपकरण अनुकूलता: Confirm that the headset is compatible with the audio device it is connected to.
७.२ माइक्रोफोनले काम गरिरहेको छैन
- माइक्रोफोन स्थिति: Ensure the microphone boom arm is rotated downwards (towards your mouth) to the 'on' position.
- केबल अखण्डता: हेडसेट केबलमा कुनै देखिने क्षति वा किङ्कहरू छन् कि छैनन् भनी जाँच गर्नुहोस्।
- अर्को यन्त्रसँग परीक्षण गर्नुहोस्: If possible, test the headset with another compatible audio device to determine if the issue lies with the headset or the connected equipment.
६.२ कमजोर ध्वनि गुणस्तर
- केबल अवस्था: Check the headset cable for any signs of damage that might affect audio transmission.
- इयरकप सिल: Ensure the earcups are properly seated around your ears to provide optimal noise isolation and sound delivery.
- हस्तक्षेप: Move away from potential sources of electromagnetic interference that might affect audio quality.
7. निर्दिष्टीकरणहरू
| सुविधा | विवरण |
|---|---|
| मोडेल नाम | CC-400 |
| जडान प्रविधि | तार |
| हेडफोन ज्याक | 4-pin Female XLR |
| माइक्रोफोन प्रकार | Hyper-cardioid Dynamic |
| शोर नियन्त्रण | Sound Isolation (High ambient-noise attenuation) |
| इयरपीस आकार | कानमाथि राख्ने कपहरू |
| वस्तुको वजन | ७.९६ पाउण्ड (३.६२ किलोग्राम) |
| केबल सुविधा | फिर्ता लिन मिल्ने |
| विशेष सुविधाहरू | Double Enclosed Ear Headset, On/Off Mic Switch (via 300-degree boom rotation) |
| सामग्री | Silicone (ear-pads), Nylon (carrying case, if included) |
8. वारेन्टी र समर्थन
Clear-Com products typically come with a standard manufacturer's warranty. For specific warranty details, service, or technical support, please refer to the official Clear-Com website or contact their customer service directly. It is recommended to keep your purchase receipt for any warranty claims.
थप सहयोगको लागि, भ्रमण गर्नुहोस् Clear-Com official webसाइट.