DYNAUDIO Emit M10 बुकशेल्फ स्पिकर निर्देशन पुस्तिका

परिचय

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

महत्त्वपूर्ण सुरक्षा जानकारी

• उत्पादन सञ्चालन गर्नु अघि यी निर्देशनहरू राम्ररी पढ्नुहोस्।
• भविष्यको सन्दर्भको लागि यी निर्देशनहरू राख्नुहोस्।
• उत्पादन र सञ्चालन निर्देशनहरूमा सबै चेतावनीहरू ध्यान दिनुहोस्।
• सबै निर्देशनहरू पालना गर्नुहोस्।
• पानी नजिक यो उपकरण प्रयोग नगर्नुहोस्।
• सुक्खा कपडाले मात्र सफा गर्नुहोस्।
• कुनै पनि भेन्टिलेसन खोल्ने ठाउँहरू नरोक्नुहोस्। निर्माताको निर्देशन अनुसार स्थापना गर्नुहोस्।
• कुनै पनि ताप स्रोतहरू जस्तै रेडिएटरहरू, तातो रजस्टरहरू, स्टोभहरू, वा अन्य उपकरणहरू (सहित amplifiers) जसले तातो उत्पादन गर्दछ।
• केवल निर्माता द्वारा निर्दिष्ट संलग्नकहरू/उपसाधनहरू प्रयोग गर्नुहोस्।
• योग्य सेवा कर्मचारीहरूलाई सबै सेवाहरू सन्दर्भ गर्नुहोस्। यन्त्रलाई कुनै पनि तरिकाले बिग्रिएको अवस्थामा, जस्तै पावर सप्लाई कर्ड वा प्लग बिग्रिएको, तरल पदार्थ छिरेको वा उपकरणमा वस्तु खसेको, उपकरण वर्षा वा चिसोको सम्पर्कमा आएको, सामान्य रूपमा काम नगरेको अवस्थामा सर्भिसिङ आवश्यक हुन्छ। , वा छोडिएको छ।

प्याकेज सामग्री

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• निर्देश पुस्तिका (यो कागजात)

यदि कुनै वस्तु हराइरहेको छ वा बिग्रिएको छ भने, कृपया तुरुन्तै आफ्नो खुद्रा विक्रेतालाई सम्पर्क गर्नुहोस्।

सेटअप

स्पिकर प्लेसमेन्ट

इष्टतम ध्वनि गुणस्तरको लागि स्पिकरको उचित स्थान महत्त्वपूर्ण छ। निम्न दिशानिर्देशहरू विचार गर्नुहोस्:

• पर्खालबाट दूरी: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• उचाइ: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• स्टेरियो त्रिकोण: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• टो-इन: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

छवि: अगाडि view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

छवि: अगाडि view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

एक मा जडान गर्दै Ampजीवनदाता

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. पावर अफ: सुनिश्चित गर्नुहोस् आफ्नो ampकुनै पनि जडान गर्नु अघि लाइफायर बन्द गरिन्छ र पावर आउटलेटबाट अनप्लग गरिन्छ।
2. स्पिकर केबलहरू: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. ध्रुवता: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. सुरक्षित जडानहरू: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

छवि: पछाडि view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

तपाईंको स्पिकरहरू सञ्चालन गर्दै

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• पावर अन: प्लग इन गर्नुहोस् र तपाइँको खोल्नुहोस् ampजीवनदाता
• भोल्युम नियन्त्रण: को साथ सुरु गर्नुहोस् amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• ब्रेक-इन अवधि: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• ग्रिलहरू: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

मर्मतसम्भार

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• सरसफाई: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• ग्रिलहरू: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• प्रत्यक्ष घाम र तातोबाट बच्न: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• आर्द्रता: Keep the speakers away from excessive moisture or humidity.
• चालक सुरक्षा: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

समस्या निवारण

यदि तपाईंले आफ्नो स्पिकरहरूमा समस्याहरू सामना गर्नुभयो भने, निम्न सामान्य समस्याहरू र समाधानहरू हेर्नुहोस्:

• कुनै आवाज छैन:
  • सुनिश्चित गर्नुहोस् amplifier is powered on and connected correctly.
  • दुबैमा सबै स्पिकर केबल जडानहरू जाँच गर्नुहोस् amplifier and the speakers for secure contact and correct polarity.
  • तपाईंको मा सही इनपुट स्रोत चयन गरिएको छ भनी प्रमाणित गर्नुहोस् ampजीवनदाता
  • Confirm the volume is turned up on the ampजीवनदाता
• विकृत ध्वनि:
  • तपाईंको मा भोल्युम स्तर घटाउनुहोस् amplifier. Overdriving the speakers can cause distortion.
  • कुनै पनि खुकुलो स्ट्र्यान्ड वा सर्ट सर्किटको लागि स्पिकर केबल जडानहरू जाँच गर्नुहोस्।
  • सुनिश्चित गर्नुहोस् amplifier's power output is suitable for the speakers (refer to specifications).
  • अडियो स्रोतमा कुनै विकृति छ कि छैन जाँच गर्नुहोस्।
• कमजोर बास:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Uneven Soundstage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

निर्दिष्टीकरणहरू

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

वारेन्टी र समर्थन

वारेन्टी जानकारी

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTY। यो वारेन्टीले सामान्य प्रयोग अन्तर्गत सामग्री र कारीगरीमा रहेका दोषहरूलाई समेट्छ। वारेन्टी दावीहरूको लागि कृपया आफ्नो खरिदको प्रमाण राख्नुहोस्।

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO webसाइट।

ग्राहक समर्थन

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webथप सहयोगको लागि साइट।

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.