HEED R 1150 RT Crash Bar Instruction Manual

1. उत्पादन समाप्तview

This manual provides detailed instructions for the installation, operation, and maintenance of the HEED Crash Bar Set designed for the BMW R 1150 RT motorcycle models manufactured between 2000 and 2004. These crash bars are engineered to offer protection to the motorcycle's engine and fairing in the event of a fall or slide.

The set includes crash bars for both the left and right sides of the motorcycle, along with a complete mounting kit and a photographic instruction manual to facilitate installation.

2. प्याकेज सामग्री

अनप्याक गर्दा, कृपया तल सूचीबद्ध सबै कम्पोनेन्टहरू उपस्थित छन् र क्षति नभएको प्रमाणित गर्नुहोस्:

• Left Crash Bar (1 unit)
• Right Crash Bar (1 unit)
• Mounting Kit (bolts, washers, spacers, etc.)
• Installation Manual with Photos (this document or a separate printed guide)

If any parts are missing or damaged, please contact your retailer or HEED customer support immediately.

3. निर्दिष्टीकरणहरू

4. सेटअप र स्थापना

महत्त्वपूर्ण: Installation should be performed by a qualified mechanic or an individual with appropriate mechanical experience. Ensure the motorcycle is stable on a center stand or paddock stand before beginning. Disconnect the battery if working near electrical components.

1. तयारी: Park the motorcycle on a level surface. Gather all tools required, including wrenches, sockets, and a torque wrench. Refer to your motorcycle's service manual for specific torque values for existing bolts that will be reused or replaced.
2. माउन्टिङ पोइन्टहरू पहिचान गर्नुहोस्: Locate the designated mounting points on the motorcycle frame. These are typically existing bolt locations near the engine and lower fairing. The included photographic manual will illustrate these points.
3. Initial Fitment (Left Side): Carefully position the left crash bar against the motorcycle. Align the mounting holes on the crash bar with the corresponding points on the frame. Insert the provided bolts, but do not tighten them fully at this stage.
4. Initial Fitment (Right Side): Repeat the process for the right crash bar, ensuring proper alignment.
5. Alignment and Adjustment: Once both crash bars are loosely fitted, visually inspect their alignment. Ensure they are symmetrical and do not interfere with any motorcycle components (e.g., exhaust, footpegs, fairing). Make minor adjustments as needed.
6. सुरक्षित फास्टनर: Systematically tighten all bolts to the manufacturer's recommended torque specifications. Start with the main frame attachment points, then proceed to any connecting points between the crash bar sections. Use a torque wrench for accuracy.
7. अन्तिम निरीक्षण: After tightening all fasteners, double-check that all bolts are secure. Ensure there is no play in the crash bars. Start the motorcycle and check for any vibrations or unusual noises caused by the newly installed parts.

छवि ३.४: बायाँ तर्फ view of the HEED crash bar installed on a BMW R 1150 RT. The silver bar wraps around the engine cylinder, providing protection.

छवि ३.१: दायाँ तिर view of the HEED crash bar installed on a BMW R 1150 RT. The silver bar extends to protect the engine and lower fairing.

छवि १: अगाडि view of the BMW R 1150 RT with HEED crash bars. The bars are visible symmetrically on both sides, offering frontal protection.

४. सञ्चालन विचारहरू

Once installed, the HEED crash bars are designed to integrate seamlessly with your motorcycle. While they provide additional protection, it is important to be aware of potential changes to the motorcycle's handling characteristics, particularly at extreme lean angles.

• Lean Angle: In aggressive cornering or at very high lean angles, there is a possibility that the crash bars may contact the ground before other parts of the motorcycle. This is a design consideration for maximum protection but may affect extreme riding dynamics. Riders should familiarize themselves with the motorcycle's new lean limits in a safe, controlled environment.
• वजन वितरण: The added weight of the crash bars is minimal but can slightly alter the motorcycle's center of gravity. This change is generally negligible for normal riding.
• नियमित जाँचहरू: Periodically inspect the crash bars and their mounting points for any signs of damage, loosening, or corrosion. Ensure all bolts remain securely tightened.

6. मर्मतसम्भार

To ensure the longevity and effectiveness of your HEED crash bars, follow these simple maintenance guidelines:

• सरसफाई: Clean the crash bars regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
• निरीक्षण: Periodically inspect the entire crash bar assembly for any signs of damage, such as bends, cracks, or deep scratches. Check the mounting bolts for tightness and corrosion.
• क्षरण संरक्षण: If the powder coating is chipped or scratched, touch up the affected area with appropriate paint to prevent rust, especially if the base material is steel.
• Post-Impact Check: In the event of a fall or impact, thoroughly inspect the crash bars and their mounting points for any deformation or damage. Even minor impacts can compromise the structural integrity. Replace damaged components immediately.

T. समस्या निवारण

यस खण्डले स्थापनाको क्रममा वा पछि उत्पन्न हुन सक्ने सामान्य समस्याहरूलाई सम्बोधन गर्दछ।

7.1. Fitment Issues

If the crash bars do not seem to fit correctly or alignment is difficult:

• Re-check Model Compatibility: Ensure the crash bars are specifically designed for the BMW R 1150 RT (2000-2004) model.
• Loosen All Bolts: If bolts were tightened prematurely, loosen all fasteners and attempt to align the bars again. Sometimes, a slight amount of play is needed to get all holes aligned before final tightening.
• Consult Photographic Manual: Refer to the included photographic manual for detailed visual guidance on mounting points and orientation.
• व्यावसायिक सहायता: If issues persist, consider seeking assistance from a professional motorcycle mechanic.

7.2. Vibration or Noise After Installation

If you experience unusual vibrations or noises after installing the crash bars:

• Check All Fasteners: Ensure all mounting bolts are securely tightened to the recommended torque specifications. Loose bolts are a common cause of vibration.
• निकासी: Verify that the crash bars do not make contact with any other motorcycle components (e.g., exhaust pipes, engine covers, fairing panels) during operation. Adjust if necessary, or add rubber spacers if minor contact points are identified.

8. वारेन्टी र समर्थन

HEED products come with a १ वर्षको वारेन्टी against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accidents, modifications, or normal wear and tear.

For warranty claims or technical support, please contact your point of purchase or HEED customer service directly. When contacting support, please have your product model (R 1150 RT crash bars) and proof of purchase readily available.

Manufacturer: HEED

Manufacturer Part Number: BMWBA0048SCBA