COMPUTHERM Q7RF Programmable Wireless Room Thermostat User Manual

1. परिचय

The COMPUTHERM Q7RF wireless room thermostat is designed for precise control of heating and air conditioning systems. This programmable device allows you to set individual temperature schedules for each day of the week, optimizing comfort and energy efficiency in your home or office. Its wireless design offers flexible placement of the thermostat unit, while the receiver unit connects directly to your boiler or air conditioning system, compatible with both 24V and 230V control circuits.

2. प्याकेज सामग्री

तपाईंको प्याकेजमा सबै कम्पोनेन्टहरू छन् भनी प्रमाणित गर्नुहोस्:

• 4 x COMPUTHERM Q7RF Room Thermostat (Transmitter Unit)
• 4 x COMPUTHERM Q7RF Receiver Unit
• उपयोगकर्ता पुस्तिका (यो कागजात)
• माउन्टिंग स्क्रू र भित्ता प्लगहरू

3. उत्पादन समाप्तview

The COMPUTHERM Q7RF system consists of two main components: the thermostat unit (transmitter) and the receiver unit. The thermostat unit measures the room temperature and allows you to set desired temperatures and programs. The receiver unit connects to your heating or cooling system and switches it on or off based on signals from the thermostat unit.

चित्र ४.१: सकियोview of the COMPUTHERM Q7RF 4-piece set, showing multiple thermostat and receiver units.

Figure 2: A single COMPUTHERM Q7RF thermostat unit communicating wirelessly with its receiver unit.

3.1 Thermostat Unit (Transmitter)

• LCD डिस्प्ले: Shows current temperature, set temperature, time, day, and program status.
• नियन्त्रण बटन: For setting temperature, time, and programming schedules.
• ब्याट्री डिब्बा: बिजुली आपूर्ति को लागी।

3.2 प्राप्तकर्ता एकाइ

• तार टर्मिनल: For connection to the heating/cooling system.
• स्थिति सूचकहरू: LEDs to show power and relay status.
• Manual Override Buttons: For temporary manual control.

4. निर्दिष्टीकरणहरू

5. सेटअप र स्थापना

5.1 Thermostat Unit Placement and Battery Installation

1. स्थान छान्नुहोस्: Place the thermostat unit in a central area of the room where it can accurately measure the ambient temperature, away from direct sunlight, drafts, or heat sources.
2. ब्याट्री स्थापना गर्नुहोस्: Open the battery compartment on the back of the thermostat unit. Insert the required batteries (typically AA or AAA, refer to the unit's markings) ensuring correct polarity. Close the compartment.
3. पावर अन: The display should light up, indicating the unit is powered.

5.2 Receiver Unit Wiring

WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power to the heating/cooling system before proceeding.

1. रिसीभर माउन्ट गर्नुहोस्: Secure the receiver unit near your boiler or air conditioning system using the provided screws and wall plugs.
2. Access Wiring Terminals: Open the cover of the receiver unit to expose the wiring terminals.
3. प्रणालीमा जडान गर्नुहोस्: Connect the receiver unit to the two-wire room thermostat connection point of your boiler or AC system. Ensure connections are secure and follow the wiring diagram provided with your heating/cooling system and the receiver unit. The COMPUTHERM Q7RF is compatible with both 24V and 230V control circuits.
4. पुनर्स्थापना पावर: Once wiring is complete and verified, close the receiver unit cover and restore power to your heating/cooling system.

5.3 Pairing the Units (If not pre-paired)

Refer to the specific instructions provided with your Q7RF set for pairing procedures. Typically, this involves pressing a pairing button on the receiver unit and then initiating a pairing sequence on the thermostat unit within a short timeframe. A successful pairing will usually be indicated by an LED on the receiver or a message on the thermostat display.

6. सञ्चालन निर्देशनहरू

४.४ LCD डिस्प्ले बुझ्ने

The LCD display provides all necessary information about the thermostat's current status and settings.

चित्र १: विस्तृत view of the COMPUTHERM Q7RF LCD display, illustrating various indicators such as program number, manual modification symbol, weekdays, time, set temperature, actual room temperature, low battery symbol, boiler ON state, and timed control symbol.

• काम गर्ने दिनहरू: हप्ताको हालको दिन संकेत गर्दछ।
• Exact Time / Time Left: Displays the current time or time remaining for a manual modification.
• कार्यक्रम नम्बर: Shows the active program segment.
• तापमान सेट गर्नुहोस्: The desired temperature set by the user.
• Actual Room Temperature: The current temperature measured by the thermostat.
• Symbol for Manual Modification: Indicates that the thermostat is currently operating under a temporary manual override.
• Temp. Modified until next manual intervention: Shows the duration of a temporary temperature change.
• Symbol for Low Battery Voltage: Appears when batteries need replacement.
• Symbol for Boiler ON State: Indicates when the heating/cooling system is active.
• Symbol for Timed Control: Indicates that a programmed schedule is active.

४.१ वर्तमान समय र दिन सेट गर्दै

1. थिच्नुहोस् TIME बटन।
2. प्रयोग गर्नुहोस् + or - घण्टा समायोजन गर्न बटनहरू, त्यसपछि थिच्नुहोस् TIME फेरि पुष्टि गर्न।
3. Repeat for minutes and day of the week.

6.3 म्यानुअल तापमान समायोजन

1. सामान्य सञ्चालन मोडमा, थिच्नुहोस् + or - इच्छित तापमान समायोजन गर्न बटनहरू।
2. The new temperature will be maintained until the next programmed time slot or until manually overridden again.

6.4 Programming Daily/Weekly Schedules

The Q7RF allows for independent programming for each day of the week. You can typically set multiple time periods with different temperatures for each day.

1. थिच्नुहोस् प्रो प्रोग्रामिङ मोड प्रविष्ट गर्न बटन।
2. प्रयोग गर्नुहोस् दिन button to select the day you wish to program (e.g., MON, TUE, etc.).
3. प्रयोग गर्नुहोस् TIME र +/- buttons to set the start time for the first program period.
4. प्रयोग गर्नुहोस् सेट सेट गर्नुहोस् र +/- buttons to set the desired temperature for this period.
5. थिच्नुहोस् प्रो again to move to the next program period for the same day, or use दिन अर्को दिन सार्न।
6. Repeat until all desired periods and days are programmed.
7. थिच्नुहोस् भाग्नुहोस् or बाहिर निस्कनुहोस् button to save and exit programming mode.

7. मर्मतसम्भार

7.1 ब्याट्री प्रतिस्थापन

When the low battery symbol appears on the LCD display, replace the batteries immediately to ensure continuous operation. Use new, high-quality alkaline batteries of the specified type.

1. Open the battery compartment cover on the back of the thermostat unit.
2. पुराना ब्याट्रीहरू हटाउनुहोस्।
3. Insert new batteries, observing correct polarity (+/-).
4. ब्याट्री कम्पार्टमेन्ट कभर बन्द गर्नुहोस्।

८.१ सरसफाई

Clean the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the units, as this may damage the electronics or finish.

T. समस्या निवारण

9. वारेन्टी र समर्थन

COMPUTHERM products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, please reach out to the COMPUTHERM customer service or your local distributor. Keep your purchase receipt as proof of purchase.