COMPUTHERM T-32 डिजिटल कोठा थर्मोस्टेट प्रयोगकर्ता पुस्तिका

1. परिचय

The COMPUTHERM T-32 room thermostat is designed for controlling most boilers and air conditioners available in the EU. It can be easily connected to any gas boiler with a two-wire thermostatic connection point, and to all air conditioning systems or electrical appliances, whether they have a 24V or 230V control circuit.

This digital thermostat allows for more precise temperature measurement and adjustment compared to traditional thermostats. It helps reduce energy costs while maintaining comfort by regulating the connected appliance (e.g., a gas boiler or pump) based on the measured and set temperatures.

मुख्य विशेषताहरु:

• सटीक तापमान नियन्त्रण: Easily set desired temperature between 5°C and 30°C in 0.5°C increments.
• Constant Indoor Temperature: Switching sensitivity of ±0.2°C or 0.1°C ensures a uniform and stable room temperature.
• बहुमुखी अनुकूलता: Suitable for boilers with a two-wire connection and various HVAC systems (24V or 230V).
• ताप र शीतलन मोडहरू: ताप र शीतलन दुवै कार्यहरूलाई समर्थन गर्दछ।
• डिजिटल प्रदर्शन: स्पष्ट र सटीक तापक्रम पठन प्रदान गर्दछ।

2. सेटअप र स्थापना

महत्त्वपूर्ण: उपकरण सक्षम व्यक्ति द्वारा स्थापित हुनुपर्छ।

2.1 प्याकेज सामग्रीहरू

सबै कम्पोनेन्टहरू उपस्थित छन् भनी प्रमाणित गर्नुहोस्:

• 1x COMPUTHERM T-32 Digital Room Thermostat
• 2x AAA ब्याट्रीहरू
• Mounting hardware (screws and wall plugs)

Figure 1: Package contents including the thermostat, batteries, and mounting hardware.

2.2 ब्याट्री स्थापना

1. Carefully remove the back cover of the thermostat.
2. Insert the two AAA batteries into the battery compartment, ensuring correct polarity (+/-).
3. पछाडिको आवरण बदल्नुहोस्।

2.3 माउन्टिङ र वायरिङ

The thermostat is designed for wall mounting in a room. Choose a location away from direct sunlight, drafts, or heat sources that could affect temperature readings.

1. Separate the front panel from the back plate.
2. भित्तामा इच्छित माउन्टिंग स्थिति चिन्ह लगाउनुहोस्।
3. प्वालहरू खन्नुहोस् र भित्ताका प्लगहरू घुसाउनुहोस्।
4. प्रदान गरिएका स्क्रूहरू प्रयोग गरेर पछाडिको प्लेट भित्तामा टाँस्नुहोस्।
5. Connect the two-wire control circuit from your boiler or HVAC system to the terminals on the back plate. Refer to the wiring diagram on the back of the thermostat for correct connections.
6. Carefully reattach the front panel to the back plate.

चित्र ४: पछाडि view of the thermostat with wiring terminals and battery compartment details.

3. सञ्चालन

3.1 प्रदर्शन ओवरview

The digital display shows the current room temperature and the set desired temperature. The thermostat features three control buttons below the display.

चित्र १: अगाडि view of the COMPUTHERM T-32 thermostat with its digital display and three control buttons.

५.२ इच्छित तापक्रम सेट गर्ने

Use the temperature control buttons (typically marked with up and down arrows or similar symbols) to adjust the desired temperature. Each press changes the temperature by 0.5°C within a range of 5°C to 30°C.

• थिच्नुहोस् माथि तीर इच्छित तापक्रम बढाउन बटन।
• थिच्नुहोस् तल तीर इच्छित तापक्रम घटाउन बटन।

The thermostat will automatically regulate the connected heating or cooling appliance to maintain the set temperature within its switching sensitivity of ±0.2°C.

3.3 Heating Mode Operation

In heating mode, if the measured room temperature falls below the set temperature minus the switching sensitivity (e.g., 22°C - 0.2°C = 21.8°C), the thermostat will activate the heating appliance. It will deactivate the heating when the room temperature rises above the set temperature plus the switching sensitivity (e.g., 22°C + 0.2°C = 22.2°C).

3.4 Cooling Mode Operation

In cooling mode, the operation is reversed. If the measured room temperature rises above the set temperature plus the switching sensitivity, the thermostat will activate the cooling appliance. It will deactivate cooling when the room temperature falls below the set temperature minus the switching sensitivity.

Note: After a temperature change using the thermostat's adjustment buttons, the switching sensitivity is temporarily not considered, allowing the thermostat to react to a difference of ±0.1°C for immediate response.

4. मर्मतसम्भार

• सरसफाई: थर्मोस्ट्याटलाई नरम, सुख्खा कपडाले पुछ्नुहोस्। घर्षण गर्ने क्लिनर वा घोलकहरू प्रयोग नगर्नुहोस्।
• ब्याट्री प्रतिस्थापन: Replace batteries when the low battery indicator appears on the display. Always use new AAA alkaline batteries.
• अवरोधहरूबाट बच्नुहोस्: Ensure no objects block the thermostat's ventilation slots or sensor, as this can affect temperature accuracy.

T. समस्या निवारण

6. निर्दिष्टीकरणहरू

• मोडेल: T32
• शक्ति स्रोत: 2x AAA 1.5V Alkaline Batteries (included)
• नियन्त्रण भोल्युमtage: 24V AC वा 230V AC
• लोड क्षमता: 8 Amperes
• तापमान मापन दायरा: 5°C देखि 30°C
• तापमान सेटिge दायरा: 5°C देखि 30°C
• तापक्रम सेटिङ वृद्धि: 0.5°C
• स्विचिङ संवेदनशीलता: ±0.2°C (or ±0.1°C after manual adjustment)
• आयाम (L x W x H): ३७ x १७ x १७ सेमी
• वजन: 160 ग्राम
• जडान: तार
• रंग: सेतो

Figure 4: Dimensions of the COMPUTHERM T-32 thermostat.

२.३ वारेन्टी

The COMPUTHERM T-32 Digital Room Thermostat comes with a ७ वर्षको निर्माताको वारेन्टी। वारेन्टी दावीहरूको लागि कृपया आफ्नो खरिदको प्रमाण राख्नुहोस्। वारेन्टीले सामान्य प्रयोग अन्तर्गत सामग्री र कारीगरीमा रहेका दोषहरूलाई समेट्छ।

१.४। समर्थन

For further assistance or if you encounter issues not covered in this manual, please refer to the official COMPUTHERM website or contact your retailer. Always ensure that any electrical work is performed by a qualified professional.

थप जानकारीको लागि, तपाईं निर्माताको भ्रमण गर्न सक्नुहुन्छ webसाइट: www.calorsol.de

Figure 5: Product packaging displaying warranty information and technical data.