1. परिचय
The HITBOX HBM1200 is a versatile 3-in-1 welding machine designed for various welding tasks. It supports Flux Core MIG (Gasless), ARC (MMA), and Lift TIG welding modes. This machine is suitable for home repairs, DIY projects, and agricultural work, offering a user-friendly experience with its synergistic control system and integrated safety features.
Image: The HITBOX HBM1200 3-in-1 welding machine, showcasing its compact design and multiple welding capabilities.
2. सुरक्षा जानकारी
वेल्डिङ उपकरणहरू सञ्चालन गर्दा सधैं सुरक्षालाई प्राथमिकता दिनुहोस्। सुरक्षा दिशानिर्देशहरू पालना गर्न असफल हुँदा गम्भीर चोटपटक वा सम्पत्ति क्षति हुन सक्छ।
- व्यक्तिगत सुरक्षा उपकरण (पीपीई): सधैं उपयुक्त छायाँ भएको वेल्डिङ हेलमेट, आगो प्रतिरोधी कपडा, वेल्डिङ पन्जा र सुरक्षा जुत्ता लगाउनुहोस्।
- भेन्टिलेसन: Ensure adequate ventilation to remove welding fumes. Work in a well-ventilated area or use fume extraction equipment.
- आगोको खतरा: ज्वलनशील पदार्थहरूलाई वेल्डिंग क्षेत्रबाट टाढा राख्नुहोस्। आगो निभाउने उपकरण सजिलै उपलब्ध राख्नुहोस्।
- विद्युतीय सुरक्षा: Ensure the welding machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before use.
- आर्क किरणहरू: आँखा र छालालाई आर्क किरणहरूबाट जोगाउनुहोस्, जसले पोल्न र आँखालाई क्षति पुर्याउन सक्छ।
- एकीकृत सुरक्षा: The HBM1200 features automatic overheat and overcurrent protection to prevent circuit damage and ensure durable operation.
Image: Illustration of the welder's safety features, including digital display, inverter technology, and heat dissipation.
3. प्याकेज सामग्री
The HITBOX HBM1200 welding machine package includes the following items:
- 1 × MIG Torch
- १ × जमिन क्लोराइडamp
- 1 × Welding Clamp (Electrode Holder)
- 1 × Brush
- 4 × Welding Nozzles
- 1 × 0.8 mm Flux-Cored Wire
- 5 × Electrodes
- 1 × प्रयोगकर्ता पुस्तिका
Image: The HITBOX HBM1200 welder shown with its included accessories, such as the MIG torch, ground clamp, र इलेक्ट्रोड होल्डर।
4. सेटअप निर्देशनहरू
4.1. पावर जडान
Connect the welding machine to a suitable 230V power supply. Ensure the power switch on the back of the unit is in the OFF position before connecting.
५.१. MMA/ARC वेल्डिङ सेटअप
- Connect the electrode holder (welding clamp) to the positive (+) terminal on the front panel.
- जमीन cl जडान गर्नुहोस्amp अगाडिको प्यानलको नकारात्मक (-) टर्मिनलमा।
- जमिनको सिसा सुरक्षित रूपमा जोड्नुहोस्amp वर्कपीस वा वेल्डिङ टेबलमा।
- Insert an electrode into the electrode holder.
4.3. Flux Core MIG Welding Setup (Gasless)
- मेसिनको साइड प्यानल खोल्नुहोस्।
- Install the 0.8mm flux-cored wire spool onto the spindle.
- फिडर मेकानिजम हुँदै तारलाई MIG टर्च लाइनरमा घुसाउनुहोस्।
- साइड प्यानल बन्द गर्नुहोस्।
- Connect the MIG torch to the negative (-) terminal on the front panel.
- जमीन cl जडान गर्नुहोस्amp to the positive (+) terminal on the front panel.
- जमिनको सिसा सुरक्षित रूपमा जोड्नुहोस्amp workpiece मा।
छवि: आन्तरिक view of the welder showing the installation of a flux-cored wire spool and the wire feeding mechanism.
4.4. Lift TIG Welding Setup
Note: A LIFT TIG torch is not included in the standard kit and must be purchased separately.
- Connect the TIG torch to the negative (-) terminal on the front panel.
- जमीन cl जडान गर्नुहोस्amp to the positive (+) terminal on the front panel.
- जमिनको सिसा सुरक्षित रूपमा जोड्नुहोस्amp workpiece मा।
- Connect the gas hose from the TIG torch to a suitable shielding gas cylinder (e.g., Argon) and regulator.
- Ensure the gas flow is set correctly for your application.
5. सञ्चालन निर्देशनहरू
5.1.२ मोड चयन
Turn on the welding machine using the power switch. Use the mode selection button on the front panel to cycle through the available welding modes: MMA (ARC), MIG, and TIG. The selected mode will be indicated by an illuminated LED.
Image: The control panel of the HBM1200, highlighting the digital display and mode selection buttons.
५.३। सिनेर्जिक कन्ट्रोल (एमआईजी मोड)
In MIG mode, the HBM1200 features a synergistic system that automatically adjusts the wire feed speed based on the welding current. This simplifies setup and ensures a stable arc and consistent, clean welds, making it ideal for beginners.
5.3. Adjusting Current and Voltage
Use the control knobs on the front panel to adjust the welding current (Amperage) र भोल्युमtage according to your specific welding requirements and material thickness. The digital display will show the current settings.
5.4. Material Compatibility and Thickness
- MIG वेल्डिंग: Compatible with 0.8mm / 1.0mm flux-cored wire. Welding thickness: 0.8–5 mm. Suitable for carbon steel, iron, galvanized steel, and copper.
- ARC Welding: Compatible with electrodes up to 2.5 mm. Welding thickness: 1–6 mm. Suitable for carbon steel, iron, galvanized steel, and copper.
- लिफ्ट TIG वेल्डिङ: Welding thickness: 1–4 mm. Supports stainless steel (requires separate LIFT TIG torch).
6. मर्मतसम्भार
नियमित मर्मतसम्भारले तपाईंको वेल्डिङ मेसिनको दीर्घायु र इष्टतम कार्यसम्पादन सुनिश्चित गर्दछ।
- सरसफाई: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary (ensure power is disconnected).
- केबल निरीक्षण: सबै वेल्डिङ केबल, टर्च र क्ल्याम्पहरू नियमित रूपमा निरीक्षण गर्नुहोस्।amps for signs of wear, cuts, or damage. Replace damaged components immediately.
- तार फिडर: तार फिडिङ सहज रूपमा सुनिश्चित गर्न तार फिडर संयन्त्र सफा र फोहोरमुक्त राख्नुहोस्।
- भण्डारण: प्रयोगमा नभएको बेला वेल्डिङ मेसिनलाई सुख्खा, सफा वातावरणमा भण्डार गर्नुहोस्।
T. समस्या निवारण
यस खण्डले सामान्य समस्याहरूको लागि सामान्य मार्गदर्शन प्रदान गर्दछ। जटिल समस्याहरूको लागि, ग्राहक समर्थनलाई सम्पर्क गर्नुहोस्।
| समस्या | सम्भावित कारण | समाधान |
|---|---|---|
| शक्ति छैन | Power cable disconnected, circuit breaker tripped, power switch off | Check power connections, reset breaker, turn on power switch |
| No arc (ARC/TIG) | Poor ground connection, incorrect current setting, faulty electrode/torch | Ensure good ground, adjust current, inspect/replace electrode/torch |
| Wire not feeding (MIG) | Wire tangled, feeder roller tension incorrect, clogged liner, wrong wire size | Check wire spool, adjust roller tension, clean liner, ensure correct wire size |
| अत्यधिक गर्मी चेतावनी | कामको चक्र नाघेको, भेन्टिलेसन राम्रो नभएको | Allow machine to cool down, ensure proper ventilation |
8. निर्दिष्टीकरणहरू
| सुविधा | विवरण |
|---|---|
| निर्माता | HITBOX |
| मोडेल | HBM1200 |
| आयाम (L x W x H) | ३७ x १७ x १७ सेमी |
| वजन | 6.8 किलो |
| भोल्युमtage | ३ भोल्ट |
| पावर प्रकार | DC |
| वेल्डिङ मोडहरू | Flux Core MIG, ARC (MMA), Lift TIG |
| MIG Wire Compatibility | 0.8 mm / 1.0 mm flux-cored wire |
| ARC Electrode Compatibility | 2.5 मिमी सम्म |
| MIG Welding Thickness | 0.8-5 मिमी |
| ARC Welding Thickness | 1-6 मिमी |
| TIG Welding Thickness | 1-4 मिमी |
| विशेष सुविधाहरू | IGBT Inverter Technology, Overheat/Overcurrent Protection, Digital Display |
| समावेश अवयवहरू | MIG torch, ground clamp, welding clamp, brush, welding nozzles, 0.8mm flux-cored wire, electrodes, user manual |
9. वारेन्टी र समर्थन
HITBOX offers reliable welding solutions with over 10 years of experience. For any issues or inquiries regarding your HBM1200 welding machine, customer service is available 24/7 to provide prompt assistance.
Please refer to the official HITBOX webविशिष्ट वारेन्टी सर्तहरू र सम्पर्क जानकारीको लागि साइट वा तपाईंको खरिद कागजात।