JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

परिचय

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

प्याकेज सामग्री

कृपया तल सूचीबद्ध सबै वस्तुहरू तपाईंको प्याकेजमा समावेश छन् भनी प्रमाणित गर्नुहोस्:

• JEYI M.2 NVMe SSD Enclosure
• थर्मल प्याडहरू
• पेचकस
• USB-A to USB-C Cable (10Gbps)
• USB-C to USB-C Cable (10Gbps)
• डोरी

सेटअप निर्देशनहरू

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

1. घेरा तयार गर्नुहोस्: Gently slide open the enclosure to reveal the internal PCB.
2. थर्मल प्याड लागू गर्नुहोस्: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
3. Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
4. SSD सुरक्षित गर्नुहोस्: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
5. घेरा बन्द गर्नुहोस्: Carefully slide the enclosure cover back into place until it clicks securely.

सञ्चालन निर्देशनहरू

Once your NVMe SSD is securely installed, connect the enclosure to your device:

1. यन्त्रमा जडान गर्नुहोस्: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
2. शक्ति सूचक: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
4. डाटा ट्रान्सफर: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

मर्मतसम्भार

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

• गर्मी व्यवस्थापन: एल्युमिनियम गasing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
• सरसफाई: घेराको बाहिरी भाग सफा गर्न नरम, सुख्खा कपडा प्रयोग गर्नुहोस्। तरल क्लिनर वा घोलकहरू प्रयोग नगर्नुहोस्।
• भण्डारण: प्रयोगमा नभएको बेला, घेरालाई प्रत्यक्ष घाम र अत्यधिक तापक्रमबाट टाढा चिसो, सुख्खा ठाउँमा भण्डार गर्नुहोस्।
• केबल हेरचाह: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

समस्या निवारण

निर्दिष्टीकरणहरू

वारेन्टी र समर्थन

For warranty information or technical support, please refer to the official JEYI webसाइटमा जानुहोस् वा सिधै तिनीहरूको ग्राहक सेवालाई सम्पर्क गर्नुहोस्। विशिष्ट वारेन्टी अवधि र समर्थन च्यानलहरू सम्बन्धी विवरणहरू सामान्यतया तपाईंको खरिद कागजात वा निर्माताको webसाइट।

निर्माता: JEYI

Webसाइट: Visit the JEYI Store on Amazon