उत्पादन समाप्त भयोview
The Phrozen Water-Washable Rapid Black Resin is a 405nm LCD UV-Curing photopolymer resin designed for high-precision 3D printing. This resin offers ease of use and post-processing due to its water-washable properties, low viscosity, and low odor. It is formulated to produce sturdy and tough printed parts, making it suitable for various models and prototyping applications.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin positioned next to a highly detailed black 3D printed model, showcasinजटिल डिजाइनहरूको लागि रेजिनको क्षमता।
सुरक्षा जानकारी
When handling Phrozen Water-Washable Rapid Black Resin, it is crucial to follow safety guidelines to prevent direct skin contact and ensure proper disposal. Always work in a well-ventilated area.
- सिफारिस गरिएको तापक्रम: Maintain a working temperature between 20°C - 25°C for optimal resin performance.
- व्यक्तिगत सुरक्षा उपकरण: Always wear gloves and a mask to avoid direct skin contact and inhalation of fumes.
- भण्डारण: Keep the resin away from children, dust, and direct sunlight to maintain its quality and prevent premature curing.
- आपतकालीन सम्पर्क: In case of direct skin contact with resin, wash immediately with plenty of water. Seek medical attention if irritation persists.
- फोहोर व्यवस्थापन: Do NOT dump waste water directly. Cure the waste water with sunlight OR add 10% Waste Disposal Agent and filter the residue before dumping. This ensures environmental safety.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin with text overlay highlighting important safety precautions and usage tips, including recommended temperature, wearing PPE, and proper disposal.
सेटअप र तयारी
- बोतल हल्लाउनुहोस्: Before each use, shake the resin bottle well to ensure the photopolymer components are thoroughly mixed.
- प्रिन्टर तयार गर्नुहोस्: Ensure your 405nm LCD 3D printer is clean and ready for operation. Check the FEP film for any damage or residue.
- राल खन्याउनुहोस्: Carefully pour the Phrozen Water-Washable Rapid Black Resin into the printer's resin vat. Avoid overfilling.
Image: A close-up of a hand pouring the black resin into the printer's vat, demonstrating the resin's low viscosity and ease of pouring.
सञ्चालन निर्देशनहरू
Phrozen Water-Washable Rapid Resin is optimized for 405nm LCD printers, designed for fast printing without compromising quality.
- स्लाइसर सेटिङहरू: Refer to your 3D printer's specific slicer software for recommended exposure times and layer heights. For this resin, a recommended layer height is 30-100 µm.
- छाप्न सुरु गर्नुहोस्: Initiate the printing process according to your printer's instructions. The resin's rapid curing properties contribute to faster print times.
- मनिटर प्रिन्ट: Observe the initial layers to ensure proper adhesion and formation.
Video: This video demonstrates the capabilities of Phrozen 3D printers and the precision achievable with their resins, including the ease of use and high-speed printing features. It showcases various applications, from artistic models to dental molds, highlighting the versatility of the Phrozen ecosystem.
Maintenance and Post-Processing
Proper post-processing is essential for achieving the best results and durability from your prints.
- सरसफाई: Unlike standard resins, Phrozen Water-Washable Resin can be cleaned with water. Rinse the printed part thoroughly with water to remove uncured resin. For best results, use a soft brush or ultrasonic cleaner.
- सुकाउने: Ensure the cleaned part is completely dry before post-curing. You can use compressed air or allow it to air dry.
- उपचार पछि: Cure the cleaned and dried part under UV light (405nm) to achieve maximum hardness and strength. The resin is designed to be tough and non-brittle after proper curing.
- Support Removal: Printed parts are sturdy, allowing for easier support removal. Carefully remove supports using appropriate tools.
Image: A 3D printed model is shown being rinsed under flowing water, emphasizing the water-washable characteristic of the resin for easy cleanup.
Image: A side-by-side comparison of two ghost-shaped 3D printed models. One, labeled "phrozen", is smooth and intact, while the other, labeled "others", shows visible cracks, illustrating the superior toughness and non-brittle nature of Phrozen resin.
समस्या निवारण
| समस्या | सम्भावित कारण | समाधान |
|---|---|---|
| प्रिन्ट बिल्ड प्लेटमा टाँसिन असफल भयो | Insufficient bottom exposure time, cold resin/environment, dirty build plate. | Increase bottom exposure time. Ensure resin and room temperature are within 20-25°C. Clean and level the build plate. |
| Printed Part is Brittle | Insufficient post-curing, over-exposure during printing. | Increase post-curing time under UV light. Reduce normal exposure time slightly if over-exposure is suspected. |
| Sticky/Tacky Surface After Cleaning | Incomplete cleaning, insufficient drying before curing. | Rinse thoroughly with water, ensuring all uncured resin is removed. Ensure the part is completely dry before post-curing. |
| Poor Print Detail/Resolution | Incorrect layer height, resin not properly mixed, printer calibration issues. | Verify layer height settings (30-100 µm recommended). Shake resin bottle well before use. Calibrate your printer if necessary. |
उत्पादन निर्दिष्टीकरण
- वजन: 1KG per bottle
- XY संकल्प: ५० µm
- सिफारिस गरिएको तहको उचाइ: 30-100 माइक्रोन
- Curing Wavelength: 405nm UV प्रकाश
- चिपचिपापन: कम
- गन्ध: कम
- गुणहरू: Water-Washable, Tough, Non-Brittle, Fast-Printing
- उत्पादन आयाम: १० x ३ x ३ इन्च
- वस्तु वजन: ०.६ किलोग्राम
- निर्माता: PHROZEN TECH CO., LTD.
- पहिलो उपलब्ध मिति: जुन १६, २०२३
वारेन्टी र समर्थन
For detailed warranty information, technical support, or further inquiries regarding your Phrozen Water-Washable Rapid Black Resin, please visit the official Phrozen webसाइटमा जानुहोस् वा उनीहरूको ग्राहक सेवामा सम्पर्क गर्नुहोस्। वारेन्टी दावीहरूको लागि आफ्नो खरिद रसिद राख्नुहोस्।
Phrozen Official Webसाइट: www.phrozen3d.com
अमेजन स्टोर: Phrozen Amazon Store