Konduone CH2332 Tumbler Heat Press Machine User Manual

1. उत्पादन समाप्तview

The Konduone CH2332 Tumbler Heat Press Machine is designed for transferring sublimation designs onto 11-30oz tumblers. This manual provides essential information for safe and effective operation of your heat press machine.

Figure 1: Konduone CH2332 Tumbler Heat Press Machine

2. सुरक्षा जानकारी

• Always operate the machine on a stable, heat-resistant surface.
• Keep hands and flammable materials away from the heating element during operation.
• Use heat-resistant gloves when handling hot tumblers or machine parts.
• मेसिनलाई चालु वा तताउँदा ध्यान नदिई नछोड्नुहोस्।
• आफ्नो कार्यस्थलमा उचित भेन्टिलेसन सुनिश्चित गर्नुहोस्।
• प्रयोगमा नभएको बेला वा सफा गर्नु अघि मेसिनलाई अनप्लग गर्नुहोस्।

3. प्याकेज सामग्री

तपाईंको प्याकेजमा सबै वस्तुहरू छन् भनी प्रमाणित गर्नुहोस्:

• Konduone CH2332 Tumbler Heat Press Machine
• निर्देशन पुस्तिका
• Heat-resistant tape
• Two (2) replacement fuses
• Two (2) heat-resistant gloves
• One (1) blank sublimation tumbler (for testing)
• सबलिमिसन पेपर
• Pre-designed sublimation paper (for testing)

4. सेटअप निर्देशनहरू

1. मेसिन अनप्याक गर्नुहोस्: प्याकेजिङबाट हिट प्रेस मेसिन र सबै सामानहरू सावधानीपूर्वक हटाउनुहोस्।
2. नियुक्ति: Place the machine on a flat, stable, and heat-resistant surface. Ensure adequate space around the machine for safe operation.
3. पावर जडान: Connect the power cord to the machine and then to a grounded electrical outlet (AC110V/60Hz).
4. Prepare Tumbler: Ensure the tumbler surface is clean. Cut your design paper to fit the tumbler. Wrap the design paper tightly around the tumbler using heat-resistant tape.
5. Pre-warm the Heater: Place a blank tumbler (without design paper) into the heating element for warm-up. This helps ensure even heat distribution.
6. दबाव समायोजन: Adjust the pressure knob until the cup fits snugly against the heating element. Turn clockwise to increase pressure, counterclockwise to decrease.

Figure 2: Tumbler Heat Press Machine with dimensions for reference.

5. सञ्चालन निर्देशनहरू

1. पावर अन: पावर स्विच प्रयोग गरेर मेसिन खोल्नुहोस्।
2. तापमान र समय सेट गर्नुहोस्: Use the control panel to set the desired temperature and time for your sublimation project. For stainless steel tumblers, preset memory mode 1 is often suitable.
3. तापको लागि पर्खनुहोस्: The machine will begin heating. Wait until the temperature reaches the set value and the heating indicator light illuminates.
4. टम्बलर घुसाउनुहोस्: Carefully place the prepared tumbler (with design paper) into the heating element. Ensure it is centered and secure.
5. टाइमर सुरु गर्नुहोस्: Press the “ENTER” button to start the countdown. The dashboard countdown sign will light up.
6. समापन: Once the timer reaches zero, a beep will sound.
7. Remove Tumbler: Turn off the machine. Using heat-resistant gloves, carefully remove the hot tumbler.
8. चिसो पार्नुहोस् र बोक्रा ताछ्नुहोस्: Allow the tumbler to cool completely before carefully removing the sublimation paper.

6. निर्दिष्टीकरणहरू

7. मर्मतसम्भार

• सरसफाई: Ensure the machine is unplugged and completely cool before cleaning. Wipe down the exterior with a soft, damp कपडा। घर्षण गर्ने क्लिनरहरू प्रयोग नगर्नुहोस् वा मेसिनलाई पानीमा डुबाउनुहोस्।
• ताप तत्व: Periodically inspect the heating element for any residue or damage. Clean gently if necessary.
• भण्डारण: प्रयोगमा नभएको बेला ताप प्रेसलाई सुख्खा, धुलो-रहित वातावरणमा भण्डार गर्नुहोस्।

T. समस्या निवारण

• मेसिन सक्रिय छैन: Check the power cord connection and ensure the outlet is functional. Verify that the power switch is in the 'ON' position. Check the fuses and replace if necessary.
• असमान ताप स्थानान्तरण: Ensure the tumbler is properly centered and the pressure is evenly applied across the heating element. Pre-warming the tumbler can also help.
• Design Not Transferring Fully: Confirm that the correct temperature and time settings are used for your specific sublimation paper and tumbler material. Increase pressure slightly if needed.
• त्रुटि कोडहरू: If an error code appears on the display, refer to the specific error code section in the full manual (if available) or contact customer support.

9. वारेन्टी र समर्थन

For warranty information, technical support, or to purchase replacement parts, please contact Konduone customer service through the retailer where you purchased the product or visit the official Konduone website. Please have your model number (CH2332) and purchase date available when contacting support.