1. उत्पादन समाप्तview
The YESWELDER FLUX-135 MINI is a versatile 135Amp 3-in-1 welding machine designed for various welding tasks. It supports Flux Core Gasless MIG, Stick, and Lift TIG welding processes. This machine is suitable for both beginners and experienced welders due to its intuitive controls and synergic features.
चित्र १: अगाडि view of the YESWELDER FLUX-135 MINI welding machine.
मुख्य विशेषताहरु:
- बहु-प्रक्रिया क्षमता: Supports Flux Core Gasless MIG, Stick, and Lift TIG welding.
- सिनर्जिक नियन्त्रण: Automatically matches recommended voltage when adjusting wire feed speed for optimized welding parameters.
- सजिलो सञ्चालन: Intuitive control panel for straightforward adjustment of welding modes, voltage, and current/wire feed speed.
- कम्प्याक्ट डिजाइन: Mini size for portability and convenience.
Figure 2: The 3-in-1 multi-function welding machine illustrating Flux Cored, Lift TIG, and Stick welding capabilities.
2. सुरक्षा जानकारी
Welding can be hazardous. Always follow safety precautions to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.
सामान्य सुरक्षा सावधानीहरू:
- इलेक्ट्रिक शक: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the welding machine is properly grounded.
- धुवाँ र ग्यासहरू: तपाईंको स्वास्थ्यको लागि खतरनाक हुन सक्छ। आफ्नो टाउकोलाई धुवाँबाट टाढा राख्नुहोस्। श्वासप्रश्वास क्षेत्र र सामान्य क्षेत्रबाट धुवाँ हटाउन भेन्टिलेसन वा निकास प्रयोग गर्नुहोस्।
- आर्क किरणहरू: आँखा र छाला जलाउन सक्छ। उचित छाया फिल्टर र सुरक्षात्मक कपडा सहितको वेल्डिंग हेलमेट लगाउनुहोस्।
- आगलागी र विस्फोट: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
- तातो भागहरू: गम्भीर रूपमा जल्न सक्छ। छुनु अघि उपकरणहरूलाई चिसो हुन दिनुहोस्।
- आवाज: अत्यधिक आवाजले श्रवणशक्तिलाई हानि पुर्याउन सक्छ। कानको सुरक्षात्मक उपकरण लगाउनुहोस्।
- कार्य क्षेत्र: Keep the work area clean, dry, and free from clutter. Ensure adequate lighting.
3. सेटअप र स्थापना
3.1 पावर जडान
Connect the welder to a standard 110V AC power outlet. Ensure the power source is capable of providing sufficient current for the welding operations.
3.2 Welding Wire Installation (Flux Core MIG)
- तार फिडर डिब्बा खोल्नुहोस्।
- Place a 2LB (4-inch spool diameter) welding wire spool onto the spindle. The FLUX-135 MINI is compatible with .030"/.08mm flux cored wire.
- गाइड ट्यूबबाट तारलाई ड्राइभ रोलर मेकानिज्ममा घुसाउनुहोस्।
- ड्राइभ रोलर टेन्सन आर्म बन्द गर्नुहोस् र टेन्सनलाई उचित रूपमा समायोजन गर्नुहोस्।
- Feed the wire through the MIG torch liner until it exits the nozzle.
Figure 3: Installation of a 2LB gasless flux cored welding wire spool.
3.3 Electrode/Torch Connections
- MIG वेल्डिंग: The MIG torch is typically pre-connected. Ensure the ground clamp वर्कपीसमा सुरक्षित रूपमा जोडिएको छ।
- स्टिक वेल्डिङ: इलेक्ट्रोड होल्डरलाई सकारात्मक (+) टर्मिनल र ग्राउन्ड क्ल्याम्पमा जडान गर्नुहोस्।amp to the negative (-) terminal for most common electrodes. Refer to electrode manufacturer specifications.
- लिफ्ट TIG वेल्डिङ: An additional Lift TIG torch (not included) is required. Connect the TIG torch to the negative (-) terminal and the ground clamp सकारात्मक (+) टर्मिनलमा।
4. सञ्चालन निर्देशनहरू
4.1 नियन्त्रण प्यानल ओभरview
The FLUX-135 MINI features a simple and intuitive control panel. It includes a digital display, mode selection knob, and adjustment knobs for voltage/current and wire feed speed.
चित्र १: विस्तृत view of the control panel, highlighting synergic control and efficiency.
4.2 मोड चयन
Use the mode selection knob to choose between Flux MIG, Stick, or Lift TIG welding processes.
४.३ सिनर्जिक नियन्त्रण र प्यारामिटर समायोजन
The synergic control feature simplifies parameter setting. When operating in Flux MIG mode, adjusting the wire feed speed knob will automatically suggest the corresponding voltage for optimal welding performance. For Stick and Lift TIG modes, the knobs will adjust current (amperage)।
४.३ वेल्डिङ प्रक्रियाहरू
- Flux Core Gasless MIG Welding:
This mode uses flux-cored wire, eliminating the need for external shielding gas. Select Flux MIG mode, set your wire feed speed (voltage will adjust synergically), and begin welding. Ensure proper stick-out and travel speed for best results. - Stick Welding (SMAW):
Select Stick mode. Insert the appropriate electrode into the electrode holder. Adjust the current (amperage) based on the electrode type and material thickness. Maintain a consistent arc length and travel speed. - Lift TIG Welding (GTAW):
Note: Requires an additional Lift TIG torch (not included). Select Lift TIG mode. Connect the TIG torch and ground clamp as described in Section 3.3. Use ER70S-6 mild steel TIG welding rods for fabrication of mild steel. Initiate the arc by gently touching the tungsten electrode to the workpiece and then lifting it slightly. Adjust current (amperage) as needed.
Figure 5: YESWELDER ER70S-6 mild steel TIG welding rods.
Figure 6: ER70S-6 TIG welding rods available in 1/16", 3/32", and 1/8" diameters, all 16" long.
Figure 7: An operator performing Lift TIG welding.
5. मर्मतसम्भार
नियमित मर्मतसम्भारले तपाईंको वेल्डिङ मेसिनको दीर्घायु र इष्टतम कार्यसम्पादन सुनिश्चित गर्दछ।
८.१ सरसफाई
- समय-समयमा मेसिनको बाहिरी भाग सुख्खा, नरम कपडाले सफा गर्नुहोस्।
- Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.
६.२ केबल र जडान निरीक्षण
- Regularly inspect all welding cables, torch leads, and ground clamps for signs of wear, damage, or loose connections. Replace damaged components immediately.
- सबै विद्युतीय जडानहरू कडा र सुरक्षित छन् भनी सुनिश्चित गर्नुहोस्।
5.3 Wire Feeder Maintenance (MIG)
- Clean the drive rollers and wire guide tubes to prevent wire feeding issues.
- Check the MIG torch liner for blockages or wear. Replace if necessary.
T. समस्या निवारण
यो खण्डले तपाईंले सामना गर्न सक्ने सामान्य समस्याहरूको समाधान प्रदान गर्दछ।
| समस्या | सम्भावित कारण | समाधान |
|---|---|---|
| वेल्डरले काम गर्दैन | No power from outlet; Power switch off; Circuit breaker tripped | Check power outlet; Turn power switch on; Reset circuit breaker |
| वेल्डिङ आर्क छैन | Poor ground connection; Incorrect settings; Damaged cables | जमिनको सतह सुनिश्चित गर्नुहोस्amp is secure; Verify mode and parameter settings; Inspect and replace damaged cables |
| तार फिडिङ समस्याहरू (MIG) | Incorrect drive roller tension; Kinked wire; Clogged liner; Wrong size tip | Adjust drive roller tension; Straighten wire; Clean or replace liner; Use correct contact tip size |
| वेल्डिङको गुणस्तर कमजोर | Incorrect parameters; Improper technique; Contaminated material | भोल्युम समायोजन गर्नुहोस्tage/current and wire speed; Practice welding technique; Clean workpiece thoroughly |
यदि तपाईंले यहाँ सूचीबद्ध नगरिएका समस्याहरू सामना गर्नुभयो वा समस्या रहिरह्यो भने, कृपया ग्राहक समर्थनलाई सम्पर्क गर्नुहोस्।
7. निर्दिष्टीकरणहरू
Technical specifications for the YESWELDER FLUX-135 MINI.
| सुविधा | विवरण |
|---|---|
| मोडेल | FLUX-135 MINI |
| इनपुट भोल्यूमtage | 110V |
| अधिकतम Ampईरेज | 135Amp |
| वेल्डिङ प्रक्रियाहरू | Flux Core Gasless MIG, Stick, Lift TIG |
| तार संगतता | 2LB (4" spool) Flux Cored Wire (.030"/.08mm) |
| TIG Rod Compatibility | ER70S-6 Mild Steel TIG Welding Rods |
| ASIN | B0DJVGP23K |
| मिति पहिलो उपलब्ध | अक्टोबर 11, 2024 |
8. वारेन्टी जानकारी
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official YESWELDER webविस्तृत वारेन्टी नियम र सर्तहरूको लागि साइट। वारेन्टी दावीहरूको लागि आफ्नो खरिदको प्रमाण राख्नुहोस्।
9. ग्राहक समर्थन
For technical assistance, spare parts, or any inquiries regarding your YESWELDER FLUX-135 MINI, please contact YESWELDER customer support. You can typically find contact information on the official YESWELDER webसाइट वा तपाईंको खुद्रा विक्रेता मार्फत।
अनलाइन स्रोतहरू: भ्रमण गर्नुहोस् YESWELDER Store on Amazon उत्पादन जानकारी र समर्थनको लागि।