Bpatoimsx BPMP-10 Steel Tablet Charging Cabinet Lockers User Manual

महत्त्वपूर्ण सुरक्षा जानकारी

• Caution: Keep charging cords away from water and other liquids.
• Do not overload compartments.
• Always unplug the power supply before inserting or removing items.
• Keep hands and fingers away from moving parts when opening and closing compartments.
• यदि क्षतिग्रस्त वा भाँचिएको छ भने प्रयोग नगर्नुहोस्।

उत्पादन समाप्त भयोview

The Bpatoimsx BPMP-10 Steel Tablet Charging Cabinet provides a secure and efficient solution for storing and charging up to 10 tablets or similar devices. Each compartment features an independent combination lock and built-in charging cables (Type-C and Apple Lightning) for convenience and security.

मुख्य विशेषताहरु:

• 10 Independent Compartments: Each with a 3-digit combination lock for privacy and security.
• Built-in Charging: Each compartment includes Type-C and Apple charging heads, supporting 10-20W fast charging.
• टिकाउ निर्माण: Full steel frame for long-lasting use.
• No Complex Installation: बक्स बाहिर प्रयोग गर्न तयार।

चित्र १: अगाडि view of the Bpatoimsx BPMP-10 Steel Tablet Charging Cabinet with all 10 compartments closed.

चित्र २: आन्तरिक view of the charging cabinet, illustrating the metal welding structure, Type-C and Apple charging heads, and the combination lock mechanism.

सेटअप निर्देशनहरू

1. अनप्याकिंग र प्लेसमेन्ट

• Carefully remove the charging cabinet from its packaging.
• Place the cabinet on a stable, flat surface, such as a desktop. Ensure adequate ventilation around the unit.

2. पावर जडान

• Locate the power input port at the rear of the cabinet.
• Connect the provided power cord to the cabinet and then plug it into a standard electrical outlet.

चित्र ४: पछाडि view of the charging cabinet with the power cord connected, ready for use.

3. Initial Lock Setup (Setting Your Combination)

Each compartment comes with a 3-digit combination lock. The factory default code is typically 0-0-0. To set your personal combination:

1. Ensure the lock is open (set to the current combination, e.g., 0-0-0).
2. Locate the small reset button or lever on the side or bottom of the lock mechanism (refer to the lock itself for exact location).
3. While holding the reset button/lever, set your desired 3-digit combination by rotating the dials.
4. रिसेट बटन/लिभर छोड्नुहोस्। तपाईंको नयाँ संयोजन अब सेट भयो।
5. महत्त्वपूर्ण: Remember your new combination. There is an administrator key provided for emergency access if the code is forgotten.

सञ्चालन निर्देशनहरू

1. Opening a Compartment

1. Rotate the dials on the combination lock to your set 3-digit code.
2. Pull the compartment door open.

2. Charging a Device

• Open the desired compartment.
• Inside, you will find a Type-C and an Apple Lightning charging cable.
• Select the appropriate cable for your device (tablet, smartphone, etc.).
• Connect your device to the charging cable. The device should begin charging automatically.
• Place your device securely within the compartment.

Figure 4: A compartment opened, showing a tablet being charged by the internal cable.

3. Closing and Locking a Compartment

• Ensure your device is properly placed and connected (if charging).
• डिब्बाको ढोका बलियोसँग बन्द गर्नुहोस्।
• Scramble the dials on the combination lock to secure the compartment.

मर्मतसम्भार

सरसफाई

• Before cleaning, always unplug the cabinet from the power outlet.
• बाहिरी सतहहरूलाई नरमले पुछ्नुहोस्, डीamp कपडा। घर्षण गर्ने क्लीनर वा सॉल्भेन्टहरूबाट बच्नुहोस् जसले फिनिशलाई क्षति पुर्‍याउन सक्छ।
• Ensure no liquid enters the charging ports or electrical components.
• Clean the interior of the compartments as needed with a dry or slightly damp कपडा।

सामान्य हेरचाह

• Regularly inspect the power cord for any signs of damage. If damaged, discontinue use and contact support.
• Check charging cables inside compartments for wear and tear.
• Ensure the cabinet is placed in a dry environment, away from direct sunlight or extreme temperatures.

समस्या निवारण

यन्त्र चार्ज भइरहेको छैन

• पावर जडान जाँच गर्नुहोस्: Ensure the cabinet is securely plugged into a working power outlet.
• केबल जडान प्रमाणित गर्नुहोस्: Make sure the device is properly connected to the charging cable inside the compartment.
• Try Another Compartment: If one compartment is not charging, try another to determine if the issue is with the compartment or the device.
• केबलहरू निरीक्षण गर्नुहोस्: Check the internal charging cables for any visible damage.

Combination Lock Not Opening

• संयोजन प्रमाणित गर्नुहोस्: Double-check that you are entering the correct 3-digit combination.
• Administrator Key: If the combination is forgotten, use the provided administrator key to open the compartment. Once open, you can reset the combination following the 'Initial Lock Setup' instructions.

निर्दिष्टीकरणहरू

Figure 5: Detailed dimensions of the Bpatoimsx BPMP-10 cabinet and its individual compartments.

वारेन्टी र समर्थन

वारेन्टी जानकारी

This Bpatoimsx product is covered by a १ वर्षको वारेन्टी from the date of purchase, ensuring protection against manufacturing defects. Please retain your proof of purchase for warranty claims.

ग्राहक समर्थन

For any questions, technical assistance, or warranty claims, please contact Bpatoimsx customer support through the retailer where the product was purchased or refer to the contact information provided with your product packaging.