UNI-T LM320D कोण मीटर प्रयोगकर्ता पुस्तिका

प्रस्तावना

Thank you for purchasing the new Angle Meter. In order to use this product safely and correctly, please read this manual thoroughly.
यो म्यानुअल पढिसकेपछि, भविष्यमा सन्दर्भको लागि म्यानुअललाई सजिलै पहुँचयोग्य ठाउँमा, अधिमानतः यन्त्रको नजिक राख्न सिफारिस गरिन्छ।

सीमित वारंटी र दायित्व

Uni-Trend guarantees that the product is free from any defect in material and workmanship within one year from the purchase date. This warranty does not apply to damages caused by accident, negligence, misuse, modification, contamination and improper handling. The dealer shall not be entitled to give any other warranty on behalf of Uni-Trend. If you need warranty service within the warranty period, please contact authorized service center or send the product back with problem description .This warranty is the only compensation you can obtain. Uni-Trend will not be responsible for any special ,indirect, incidental or subsequent damage or loss caused by any reason or speculation. As some areas or countries do not allow imitations on implied warranties and incidental or subsequent damage, the above limitation of liability and stipulation may not apply to you.

उत्पादन संरचना

1. लेजर अन/अफ बटन (केवल LM320E, LM320F)
2. -/+ डिस्प्ले आइकन
3. कोण दिशा आइकन
4. निरपेक्ष/सापेक्षिक मान स्विच
5. ( in / f * t, mm / m . %,°)Unit Switch
6. कोण प्रदर्शन
7. Absolute/ Relative Value Display
8. युनिट स्विच/ध्वनि अन/अफ
9. ब्याट्री डिस्प्ले
10. म्युट आइकन
11. डेटा-होल्ड डिस्प्ले
12. पावर/डेटा लक बटन
13. लेजर उत्सर्जन प्वाल (केवल LM320E, LM320F)
14. प्रकार-सी चार्जिंग पोर्ट

सञ्चालन:

शक्ति On: In power-off state, long press पावर अन गर्न बटन।
पावर अफ: In power-on state, long press पावर अफ गर्न बटन।

Laser ON/OFF (LM320E)
पावर-अन अवस्थामा, छोटो प्रेस button to make all lasers on, and short press side. Short press button again to make the laser off on the right button again, the laser on the left side is off, and then short press button again to make all lasers off.

Laser ON/OFF (LM320F)
पावर-अन अवस्थामा, छोटो प्रेस button to make all lasers on, and short press button again to make the laser off on the top side. Short press button again, the laser on the left side is off, and then short press button again to make the laser off on the right side; Short press  button again to make all lasers off.

कोण मापन
In power- on state, place the device on the inclined plane, the show value on the screen is the angle value between the inclined plane and the horizontal plane.

REF (सापेक्षिक मूल्य मोड):
मापन मोडमा, छोटो प्रेस button to enter the Relative Value mode (Set the current value to 0), and short press it again to exit the mode.

क्यालिब्रेसन मोड

Place the device on the absolute horizon, continuously long press button for three times to enter the self-calibration mode (see figure 1); CALO flashes on the screen, short press button to confirm to enter the auto zero calibration (see figure 2).
उपकरणलाई ९० डिग्री घुमाउनुहोस्, थिच्नुहोस् flashes on the screen; short press button and CAL1 button to confirm to enter the auto zero calibration (see figure 3). Rotate the device 90 degrees, press छोटो प्रेस बटन and CAL2 flashes on the screen; button to confirm to enter the auto zero calibration (see figure 4). Rotate the device 90 degrees, press and CAL3 flashes on the screen; short press button button to confirm to enter the auto zero calibration (see figure 5). The the calibration, and recover the use of is after power-on.

चित्र १

चित्र १

चित्र १

चित्र १

चित्र १

डाटा लक
In the measurement mode, short press button to lock the current measured data; short press again to unlock the data.

युनिट स्विच र साउन्ड अन/अफ

For LM320E/LM320F, long press button to switch the unit (in unit by default), mm/m,%, or in/ft. In in/ft unit display, when ‘-‘icon shows on the screen, the range of measured value is within ‘measured value – 1/8 ~ measured value’; when+’icon shows, the range of measured value is within ‘measured value ~ measured value 1 / (8’) For example, 11.7/8 display means 11 and 7/8; 9 – 3/8 display means 9 and 3/8.
For LM320D, short press UNIT button to switch the unit. For LM320E/LM320F, short press button to make the sound button to make indication on/off; For LM320D, short press the sound indication on/off.

चार्ज
ब्याट्री कम हुँदाको आइकन shows on the screen, please charge the device with charging cable in the accessories. In the power-off state, battery is fully charged when its icon stops flashing and not showed on the screen any more.

प्राविधिक प्यारामिटरहरू

	मोडेलहरू		LM320D		LM320E	LM320F
	मापन दायरा		१4 * °० °		१4 * °० °	१4 * °० °
	संकल्प		±0.05°		±0.05°	±0.05°
	कोण शुद्धता		±0.2°		±0.2°	±0.2°
	पुनरावृत्ति		±0.2°		±0.2°	±0.2°
	एकाइ		कोण; प्रतिशतtage; मिमी/मिटरको मेट्रिक प्रणाली; इंच/फिटको ब्रिटिश प्रणाली।
	लेजर लाइनहरू		N		2 रेखाहरू	13 रेखाहरू
	लेजर सटीकता		N		±3mm/5m
	चुम्बकीय आधार		Two-sided magnetic		Two-sided magnetic	I Four Fished magnetic
	Relative/Absolute Angle Measurement		✓
	कोण होल्ड		✓
	स्क्रिन रोटेशन		✓
	पावर अफ		५ मिनेटमा कुनै अपरेशन छैन।
	सामग्री		अल-मिश्र धातु फ्रेम + ABS
	विद्युत आपूर्ति		3.7V 1000mAh लिथियम ब्याट्री
	काम गर्ने तापमान		0°C – + 50 °C
लेजर क्लास		N		कक्षा ३
लेजर जीवन		N		630-670n m, <1mW
ब्याट्री जीवन		८ घन्टा		8h			1             6h
साइज		83.5*70*35.5mm
प्याकेज		कोण मिटर*१, टाइप-सी केबल*१, उपहार बक्स*१, प्रयोगकर्ता पुस्तिका*१

सावधानी:

1. Do not use organic solvents to wash the percision equipment. Take it far away from water and corrosives.
2. Do not damage the surface of device; use soft cloth towipe the dust for its accuracy.
3. For power saving, the device will be auto power off if no operations in 5 minutes.

लेजर रेडिएसन
DO NOT STARE INTO BEAM CLASS 2 CONSUMER LASER PRODUCT Compliance with IEC/EN 60825-1, EN 50689.

म्यानुअल पूर्व सूचना बिना परिवर्तन को विषय हो!

Due to different batches, the materials and details of actual products may be slightly different from the graphic information, please refer to the actual product received. Experimental data provided in the page is from internal laboratory of UNI-T, but it should not be a reference for customer to place orders. Any questions, please contact the customer service, thanks

UNI- प्रविधि टेक्नोलोजी (चीन) कं, लि।
No.6, Gong Ye Bei 1st Road, Songshan Lake National High-tech Industrial Development Zone, Dongguan City, Guangdong Province, China टेलिफोन: (८६-७६९) ८५७२ ३८८८
www.uni-trend.com
P/N:110401113327X

कागजातहरू / स्रोतहरू

	UNI-T LM320D कोण मीटर [pdf] प्रयोगकर्ता पुस्तिका LM320D, LM320E, LM320F, LM320D कोण मिटर, LM320D, कोण मिटर, मिटर
	UNI-T LM320D कोण मीटर [pdf] प्रयोगकर्ता पुस्तिका LM320D, LM320E, LM320F, LM320D Angle Meter, LM320D, Angle Meter

सन्दर्भहरू

• प्रयोगकर्ता पुस्तिका