RIDGID 26192 4-Piece Pipe Threader Dies Set Instruction Manual

1. उत्पादन समाप्तview

The RIDGID 26192 4-Piece Pipe Threader Dies Set is engineered for precision pipe threading. This set includes high-speed NPT dies designed specifically for seamless integration and optimal performance with the RIDGID Model 1224 Threading Machine. Crafted from durable high-speed steel, these dies ensure clean and accurate threads for various applications.

• High-Speed Steel Construction: Provides exceptional durability and extended service life for professional threading tasks.
• NPT Thread Compatibility: Specifically designed for National Pipe Taper (NPT) threads, suitable for plumbing and gas systems.
• बहुमुखी आवेदन: Capable of threading diverse pipe materials including black, galvanized, plastic-coated stainless steel, IMC, heavy-duty wall conduit, and rod up to 30 Rockwell C hardness.
• पूरा सेट: Includes four dies, ensuring consistent threading performance when all dies are replaced simultaneously.

2. सुरक्षा जानकारी

Always prioritize safety when operating power tools and handling sharp components. Failure to follow safety guidelines can result in serious injury.

• Read Manuals: Always read and understand the instruction manual for the RIDGID Model 1224 Threading Machine before operating.
• आँखा सुरक्षा: Wear ANSI-approved safety glasses or goggles to protect against flying debris.
• हात संरक्षण: Wear appropriate work gloves to protect hands from sharp edges and hot surfaces.
• कार्य क्षेत्र: तपाईंको कार्य क्षेत्र सफा, राम्रोसँग उज्यालो भएको र अवरोधहरूबाट मुक्त छ भनी सुनिश्चित गर्नुहोस्।
• सुरक्षित कार्यपिका: Always properly secure the pipe in the threading machine's vise to prevent rotation during operation.
• पावर डिस्कनेक्ट: Disconnect power to the threading machine before performing any maintenance, adjustments, or die changes.

3. सेटअप र स्थापना

Proper installation of the dies is crucial for achieving accurate threads and ensuring the longevity of your equipment. These dies are specifically designed for the RIDGID Model 1224 Threading Machine.

3.1. Installing the Dies

1. Ensure the RIDGID Model 1224 Threading Machine is powered off and unplugged.
2. Open the die head of the threading machine.
3. Carefully remove any old or worn dies.
4. Insert the four new RIDGID 26192 dies into their respective slots in the die head. It is recommended to replace all four dies simultaneously to maintain consistent threading performance.
5. Ensure each die is seated correctly and securely in its slot.
6. Close the die head and ensure it is properly latched.

4. सञ्चालन निर्देशनहरू

Follow these steps for effective and safe pipe threading using the RIDGID 26192 dies with your Model 1224 Threading Machine.

4.1. Preparing the Pipe

1. Cut the pipe to the desired length, ensuring the cut is square and burr-free.
2. Ream the inside of the pipe to remove any internal burrs that could obstruct flow or damage the dies.
3. सुरक्षित रूपमा clamp the pipe in the threading machine's vise. Ensure the pipe is level and stable.

4.2. Threading Process

1. Position the die head against the end of the pipe.
2. Engage the threading machine. The integral through-head system will continuously flood the threading area with lubrication. This is critical for cooling the dies, reducing friction, and clearing chips, which ensures a smooth operation and extends die life.
3. Allow the machine to cut the threads to the appropriate length and taper for NPT (National Pipe Taper) threads. The dies are designed to cut both tapered and straight threads, including NPT/NPSM and BSPT/BSPP.
4. Once threading is complete, disengage the machine and carefully retract the die head.
5. Inspect the newly cut threads for quality and consistency.

5. मर्मतसम्भार

Regular maintenance of your RIDGID 26192 dies will ensure optimal performance and extend their lifespan.

• सरसफाई: After each use, clean the dies thoroughly to remove metal chips, debris, and old cutting oil. Use a stiff brush and appropriate cleaning solution.
• स्नेहन: Ensure the die head's lubrication system is functioning correctly and that adequate cutting oil is used during operation.
• निरीक्षण: Periodically inspect the cutting edges of the dies for wear, chipping, or damage. Worn dies will produce poor quality threads and should be replaced.
• भण्डारण: Store the dies in a clean, dry environment to prevent rust and corrosion. The original packaging or a dedicated tool case is ideal.

T. समस्या निवारण

If you encounter issues while threading, consider the following common problems and solutions:

For issues related to the threading machine itself, consult the RIDGID Model 1224 Threading Machine's instruction manual.

7. निर्दिष्टीकरणहरू

• मोडेल नम्बर: 26192
• सेट समावेश: 4-Piece Pipe Threader Dies
• Compatible Machine: RIDGID Model 1224 Threading Machine
• पाइप क्षमता: 2-1/2 inches to 4 inches
• थ्रेड प्रकार: National Pipe Taper (NPT), also capable of NPT/NPSM and BSPT/BSPP
• हस्तान्तरण: Right-Handed
• सामग्री: उच्च गति इस्पात
• वस्तु वजन: लगभग 2 पाउन्ड
• उत्पादन आयाम: लगभग 3.11 x 3.11 x 2.2 इन्च
• रंग: चाँदी

२.३ वारेन्टी

RIDGID stands behind the quality of its products. The 26192 4-Piece Pipe Threader Dies Set is covered by a Full Lifetime Warranty.

वारेन्टी विवरण: Should your tool ever malfunction from defects in workmanship or materials, RIDGID will repair or replace the tool free of charge.

१.४। समर्थन

For further assistance, technical support, or to inquire about replacement parts, please contact RIDGID customer service or visit their official webसाइट।

• RIDGID आधिकारिक Webसाइट: www.ridgid.com
• RIDGID Store on Amazon: Visit the RIDGID Store