EasySMX X15 खेल नियन्त्रक

प्रिय ग्राहक

हाम्रो उत्पादन खरिद गर्नुभएकोमा धन्यवाद।
कृपया यो प्रयोगकर्तालाई ध्यानपूर्वक पढ्नुहोस् र थप सन्दर्भको लागि यसलाई राख्नुहोस्।

यदि तपाइँसँग कुनै समस्या वा सुझावहरू छन् भने, कृपया हामीलाई छिटो सम्पर्क गर्नुहोस् र हामी तपाईंलाई सकेसम्म चाँडो जवाफ दिनेछौं।

योजनाबद्ध रेखाचित्र

Controller Power On/Off

पावर अन: Short press the HOME button to power on the controller;
पावर अफ: Long press the HOME button for 5 seconds to power off the controller.

2.4G Wireless Connection to PC

1. Insert the receiver into the USB port of the PC;
2. With the controller powered off, Click the HOME button, the controller LED indicators will flash, indicating that it has entered pairing mode;
3. The LED indicators (LED2+LED3+LED4) will remain on, indicating that the connection is successful.
   [नोट] If the controller fails to pair with the receiver, you can perform a forced pairing.
   1. Insert the receiver into a USB port on your computer, press the button on the receiver once briefly (it will flash quickly),
   2. Then power on the controller by pressing and holding the Home button for 3 seconds.
      The controller’s LED indicators will flash quickly, and when they become solid, the controller will vibrate briefly, indicating a successful pairing.

[नोट] When connecting to a pc through the 2.4G usb receiver, you can switch mode between xinput/switch/dinput modes by long-pressing the “-” + “+” keys for 6 seconds.

पीसीमा तार जडान

Wired Connect the controller to the computer’s USB port using a data cable. The LED indicators (LED1+LED4) will remain on, indicating that the connection is successful.

Bluetooth Connection to PC

1. Find the Bluetooth in computer Setting menu — “Add Bluetooth or Other Devices” page.
2. With the controller powered off, long press the “X” and “HOME” buttons for 3 seconds until the led indicator (LED1+LED4) flash, then release to enter pairing mode.
3. In the computer’s Bluetooth settings, search for “Xbox Wireless Controller” for pairing and connection. The LED indicators (LED1+LED4) will remain on, indicating that the connection is successful.

Connecting PC in Switch Mode

With the controller powered off, press down the right joysticks and hold it, connect to the PC via USB data cable.

Connecting SWITCH

1. On the SWITCH main interface, click “Controller” → “Change Grip/Order”.
2. With the controller powered off, long press the HOME button for 3 seconds. The led indicators will flash quickly, entering pairing mode. After 3-5 seconds, the led indicator will remain on, indicating successful connection.

Connecting Android Device

1. With the controller powered off, long press the “A” + “HOME” buttons for 3 seconds until the led indicators L E2+LED3 flash, then release to pair the controller.
2. Open the Bluetooth settings on the Android device and search for “EasySMX * 15 ^ prime prime for pairing. The LED indicators (LED * 2 + LED * 3) will remain on, indicating successfully connection.

Connecting iOS Device

1. With the controller powered off, long press the “X” and “HOME” buttons for 3 seconds until the LED indicator (LED1+LED4) flash, then release to pair the controller.
2. Open the Bluetooth settings on the iOS device and search for “Xbox Wireless Controller” for pairing. The LED indicators (LED1+LED4) will remain on, indicating successfully.

ABXY Key Swap Setting

Simultaneously press ” B “+” keys. The function of ABXY key can be switched between PC button layout and Switch button layout.

म्याक्रो प्रोग्रामिङ सेटिङ

Click the Programming Button, controller enter programming mode when the led 2 and led 3 light up; then press the M1 button once and then press the desired programmed button such as A or AB button, then press M1 again to save the settings successfully.

प्रकाश सेटिङ

RGB लाइट अन/अफ	Toggle the RGB Lights Switch to turn on/off the RGB lights.
लाइट मोड स्विचिङ	थिच्नुहोस् “-” + “D pad UP” button to adjust lighting to “Colorful” mode थिच्नुहोस् “-” + “D pad Down” button to adjust lighting to “Steady” mode.
रङ समायोजन	थिच्नुहोस् “-^ prime +” D pad Left to adjust lighting color in a Positive direction. थिच्नुहोस् “-” + “D pad Right” to adjust lighting color in a Negative direction.

Clear Macro Programming Setting

Long press the Programming SET Button for 5 seconds to clear all macro programming settings.

टर्बो सेटिङ

Manual Auto-fire:

Press T + A for the first time: Hold down the A button, and A will achieve continuous trigger.

Automatic Auto-fire:

Press T + A for the second time: click the A button, and A will achieve continuous trigger.

Cancel Auto-fire:

Press T + A for the third time: The continuous trigger function will be cleared.

[नोट] सबै बटनहरूको लागि टर्बो प्रकार्य खाली गर्न 5 सेकेन्डको लागि टर्बो बटन थिच्नुहोस् र होल्ड गर्नुहोस्।

टर्बो गति समायोजन

Turbo +”+”button increases the auto-fire speed; Turbo +”-“button reduces the auto-fire speed.

Motor Vibration Setting

Hold down “T” key and simultaneously move the left 3D joystick up/down to adjust vibration.

चार्ज सूचक

Charging while powered off:

All led indicators flash slowly, and when fully charged, all indicators turn off.

Charging in working state:

The current mode light flashes slowly, and when fully charged, the current mode light remains on.

उत्पादन निर्दिष्टीकरण

मोडेल नम्बर	X15
ब्याट्री क्षमता	1000mAh
चार्ज गर्दै वर्तमान	400mA
सञ्चालन वर्तमान	60mA
सञ्चालन तापमान	०.१-२०.० डिग्री सेल्सियस

सुरक्षा जानकारी

यन्त्र प्रयोग गर्नु र सञ्चालन गर्नु अघि, कृपया यन्त्रको इष्टतम कार्यसम्पादन सुनिश्चित गर्न र खतराहरू वा अवैध परिस्थितिहरूबाट बच्न तलका सावधानीहरू पढ्नुहोस् र पालना गर्नुहोस्।

1. यन्त्रलाई ०°C देखि ३५°C सम्मको तापक्रम दायरा भित्र प्रयोग गर्नुहोस् र यन्त्र र यसका सामानहरूलाई -१०°C देखि ४०°C सम्म भण्डार गर्नुहोस्। अत्यधिक तापक्रमले यन्त्र खराब हुन सक्छ।
2. यन्त्र र यसका सामानहरूमा साना भागहरू हुन सक्छन्। आकस्मिक क्षति वा निसास्सिने खतराहरूबाट बच्न तिनीहरूलाई बालबालिकाको पहुँचबाट टाढा राख्नुहोस्।
3. आगो वा बिजुलीको झट्काको जोखिमबाट बच्न उपकरण र यसका सामानहरूलाई वर्षा वा ओसिलोपनमा पर्नबाट जोगाउनुहोस्।
4. Keep the device and its batteries away from fire, high tempera-tures, and direct sunlight.
5. ब्याट्रीहरूलाई आगोमा नफाल्नुहोस्; ब्याट्रीहरू छुट्याउन, खसाल्न, कुचल्न वा परिमार्जन नगर्नुहोस्; विदेशी वस्तुहरू घुसाउनबाट जोगिनुहोस्। ब्याट्रीहरूलाई पानी वा अन्य तरल पदार्थमा नडुबाउनुहोस्; चुहावट, अत्यधिक तातोपन, आगो वा विस्फोट हुनबाट जोगाउन ब्याट्रीहरूमा बाह्य प्रभाव र दबाबबाट बच्नुहोस्।
6. अत्यधिक तातो, आगो, वा व्यक्तिगत चोटपटक लाग्न सक्ने क्षतिलाई रोक्नको लागि आफैंले ब्याट्रीहरू नबदल्नुहोस्।
7. यन्त्र (बिल्ट-इन ब्याट्रीहरू प्रतिस्थापन सहित) र सहायक उपकरणहरूलाई प्राधिकरण बिना छुट्याउन वा परिमार्जन नगर्नुहोस्, किनकि यसले वारेन्टी शून्य हुनेछ।
8. स्थानीय नियमहरू अनुसार उपकरण, ब्याट्री र अन्य सामानहरू उचित रूपमा विसर्जन गर्नुहोस्। ब्याट्रीको अनुचित व्यवस्थापनले विस्फोट हुन सक्छ।

ग्राहक समर्थन

अमेजन अमेरिका: support.us@easysmx.com
Amazon FR: support.fr@easysmx.com
Amazon IT: support.it@easysmx.com
Amazon ES: support.es@easysmx.com
Amazon JP: support.jp@easysmx.com
Amazon DE: leslie@easysmx.com
अमेजन युके: jane@easysmx.com
AliExpress: aliexpress@easysmx.com
Walmart: walmart@easysmx.com
आधिकारिक Webसाइट: official@easysmx.com

कागजातहरू / स्रोतहरू

EasySMX X15 खेल नियन्त्रक [pdf] प्रयोगकर्ता पुस्तिका X15 खेल नियन्त्रक, X15, खेल नियन्त्रक, नियन्त्रक

सन्दर्भहरू

• प्रयोगकर्ता पुस्तिका