सामग्री
लुकाउनुहोस्
HONGWEI माइक्रोइलेक्ट्रोनिक्स ESP32 C3 विकास बोर्ड मोड्युलहरू मिनी वाइफाइ BT ब्लुटुथ मोड्युल
निर्दिष्टीकरणहरू
- उत्पादन: ESP32 Development Board
- निर्माता: Espressif
- अनुकूलता: Arduino IDE
- Webसाइट: https://www.arduino.cc/en/Main/Software
उत्पादन उपयोग निर्देशन
Download Software and Development Board
- आधिकारिक वेबसाइटबाट Arduino IDE सफ्टवेयर डाउनलोड गर्नुहोस्। webमाथि प्रदान गरिएको साइट।
- सेटअप प्रक्रिया सुरु गर्न Arduino IDE सफ्टवेयर खोल्नुहोस्।
Add ESP32 Development Environment
- Arduino IDE मा, जानुहोस् File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- चयन गर्नुहोस् File -> पूर्वample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
अस्वीकरण र प्रतिलिपि अधिकार सूचना
सहित यस कागजात मा जानकारी URL सन्दर्भको लागि ठेगानाहरू, सूचना बिना परिवर्तनको विषय हो। कागजातहरू कुनै पनि प्रकारको वारेन्टी बिना "जस्तै छ" प्रदान गरिन्छ, कुनै पनि व्यापारिकताको कुनै पनि वारेन्टी सहित, विशेष उद्देश्यको लागि फिटनेस, वा गैर-उल्लंघन, र कुनै पनि प्रस्ताव, विशिष्टता वा s मा अन्यत्र उल्लेख गरिएको कुनै पनि वारेन्टीहरू।ample। यस कागजातमा कुनै पनि जिम्मेवारी ग्रहण गरिएको छैन, यस कागजातमा जानकारीको प्रयोगबाट उत्पन्न हुने कुनै पनि पेटेन्ट अधिकारहरूको उल्लङ्घनको लागि कुनै दायित्व सहित। यस कागजातले कुनै पनि बौद्धिक सम्पदा अधिकारहरू प्रयोग गर्नको लागि कुनै पनि इजाजतपत्र, अभिव्यक्त वा निहित, एस्टोपेल वा अन्यथा प्रदान गर्दैन।
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
नोट
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
माथिview
उत्पादन परिचय
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
प्यारामिटरहरू
अवयव परिचय
Components and interfaces
नोट: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
पिन परिभाषा
निम्न सकारात्मक दृष्टान्तले ESP32-C3-MINI-1-TB लाई पूर्वको रूपमा देखाउँछampLe:
नोटहरू
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
समारोह परिचय
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
कार्यक्रम जलाउने गाइड
- पावर अन गर्नु अघि, सुनिश्चित गर्नुहोस् कि ESP32-C3-MINI-1-TB र ESP32-C3-MINI-1U-TB अक्षुण्ण छन्।
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
संशोधन इतिहास
बारम्बार सोधिने प्रश्नहरू
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
कागजातहरू / स्रोतहरू
 |
HONGWEI माइक्रोइलेक्ट्रोनिक्स ESP32 C3 विकास बोर्ड मोड्युलहरू मिनी वाइफाइ BT ब्लुटुथ मोड्युल [pdf] प्रयोगकर्ता गाइड ESP32 C3 विकास बोर्ड मोड्युलहरू मिनी वाइफाइ BT ब्लुटुथ मोड्युल, ESP32 C3, विकास बोर्ड मोड्युलहरू मिनी वाइफाइ BT ब्लुटुथ मोड्युल, बोर्ड मोड्युलहरू मिनी वाइफाइ BT ब्लुटुथ मोड्युल, वाइफाइ BT ब्लुटुथ मोड्युल, BT ब्लुटुथ मोड्युल, ब्लुटुथ मोड्युल |