
मल्टिफंक्शन एयर क्वालिटी सेन्सर मोड्युल (मोडबस)
SRAQ-D701 को लागि प्रयोगकर्ता गाइड

उत्पादन विवरण
The SRAQ-D701 is a comprehensive air quality sensor module which combines CO², laser dust, temperature and humidity, TVOC and formaldehyde.
Developed for integration into air purifiers, air quality monitors and custom enclosures. The SRAQ-D701 provides real time concentration values via Modbus-RTU output. It offer good stability, and is well suited for applications where TVOC and particulate matter concentrations are a concern.
सुविधाहरू
- Detects multiple pollutants CO2, dust etc.
- मोडबस आउटपुट
- High reliability and good stability
- High accuracy & fast response
- Compact design for easy integration
अनुप्रयोगहरू
- Office and commercial buildings
- Factory floors
- प्रयोगशालाहरू
- HAVC industry
- General air quality monitoring
- Smart home systems
Thank you for choosing L-com product. To ensure safe, accurate performance and product longevity, please take a moment to familiarize yourself with this manual before powering the device. Please keep it handy for future reference. In case of any questions regarding the installation or use of product, please call us at 800.341.5266.
मा हामीलाई सम्पर्क गर्नुहोस् customerservice@l-com.com र हाम्रो भ्रमण गर्नुहोस् webसाइट मा www.l-com.com
This datasheet has been downloaded from http://www.digchip.com at this पृष्ठ
प्राविधिक प्यारामिटरहरू
Detection Parameters and Resolution: The CO2 value and formaldehyde value measured by the module are equivalent value of TVOC, please pay attention when using or purchasing.
| प्रदूषक | मापन संकल्प | मापन दायरा | शुद्धता |
| eCO2 | ३.० पीपीएम | 400 ~ 5000 पीपीएम | ± १२ पीपीएम |
| PM2.5 | २६ वर्ष/महिना3 | 0~1000 ug/m3 | ± १५% |
| PM10 | २६ वर्ष/महिना3 | 0~1000 ug/m3 | ± १५% |
| तापक्रम | ४५ डिग्री सेल्सियस | ~ 20 ~ °~ डिग्री सेल्सियस | ± ०,५ डिग्री सेल्सियस |
| आर्द्रता | ८६% | 5~100% RH | ± २.%% आरएच |
| TVOC | २६ वर्ष/महिना3 | २६ वर्ष/महिना3 | ± 90 ug/m3 |
| CH2O | २६ वर्ष/महिना3 | २६ वर्ष/महिना3 | ± 40 ug/m3 |
- काम भोल्युमtage: १५ ± ३ गाविस
- Working environment: Working temperature 0~50 °C, Working humidity: 15% RH 90% RH (no condensation)
- Working environment: Temperature range -20~60 °C, Humidity: 5% RH 95% RH (no condensation)
- Communication method: Modbus RTU RS485
- Preheating time: 10-15 minutes, the longer the power-on time, the more stable the data will be.
माउन्टिङ रेखाचित्र
माउन्टिङ प्रकार: बोर्ड माउन्ट। प्वाल व्यास २ मिमी, पिच ११.५ मिमी।

तार परिभाषा
पोर्ट कनेक्टर प्रकार XH2.54mm पिच ४-पिन टर्मिनल कनेक्टर हो, PCB मा ९०° ठाडो माउन्ट गरिएको।
| क्रम संख्या | कार्य | नोटहरू | रङ |
| 1 | VCC | 12 – 24 VDC, power supply positive | ब्राउन |
| 2 | GND | GND, पावर सप्लाई नकारात्मक | कालो |
| 3 | RS485_A+ | RS485_A+ | हरियो |
| 4 | RS485_B- | RS485_B- | निलो |
संचार प्रोटोकल
The module hardware supports serial TTL communication interface and RS485 communication interface. When testing, users need to choose the corresponding communication method development according to the module interface type they have purchased.
RS485 Interface Communication Interface Related Protocol:
Serial port parameters: (9600/8/N/1) Mod Bus-RTU 485
The factory default address of the module is 0x01
Baud rate: 9600, Check bit: no, Stop position: 1 bit
Return data time: <300ms
The reading speed cannot exceed 350ms
ठेगाना आदेश पढ्नुहोस्
| प्राप्त गर्नुहोस् | फिक्स | प्रकार्य कोड | फिक्स | फिक्स | फिक्स | फिक्स | CRC_L | CRC_H |
| FE | 17 | 00 | 00 | 00 | 01 | CRC जाँच | ||
| जवाफ | फिक्स | प्रकार्य कोड | बाइटहरूको संख्या | फर्मवेयर संस्करण | हालको ठेगाना | CRC_L | CRC_H | - |
| FE | 17 | 02 | xx | yy | CRC जाँच | - | ||
पूर्वका लागिample: Send command: FE 17 00 00 00 01 A0 06 Return data: FE 17 02 11 01 64 30
Indicates that the device address is 01 and the version number is V1.1
ठेगाना आदेश परिमार्जन गर्नुहोस्
मोड्युलको कारखाना पूर्वनिर्धारित ठेगाना ०x०१ हो, र ठेगाना दायरा ०~२५४ मा परिवर्तन गर्न सकिन्छ।
| प्राप्त गर्नुहोस् | हालको ठेगाना | प्रकार्य कोड | फिक्स | फिक्स | आरक्षित | पूर्वनिर्धारित ठेगाना | CRC_L | CRC_H |
| yy | 06 | 00 | 00 | 00 | zz | CRC चेक | ||
| जवाफ | Address Before Modification | प्रकार्य कोड | बाइटहरूको संख्या | राख्नुहोस् | Modified Address | CRC_L | CRC_H | - |
| yy | 06 | 02 | 00 | Zz | CRC चेक | - | ||
पूर्वका लागिample: When the current address is 01, the preset address is: 02
Send command: 01 06 00 00 00 02 08 0B Return data: 01 06 02 00 02 39 49
डेटा आदेश पढ्नुहोस्
| प्राप्त गर्नुहोस् | हालको ठेगाना | प्रकार्य कोड | सुरु ठेगाना दर्ता गर्नुहोस् | पढ्न आवश्यक पर्ने सेन्सरहरूको संख्या | CRC_L | CRC_H | ||
| yy | 03 | 00 | MM | 00 | NN | CRC चेक | ||
| जवाफ | हालको ठेगाना | प्रकार्य कोड | डाटा लम्बाई | सेन्सर डाटा | CRC_L | CRC_H | - | |
| yy | 03 | एनएन*२ | xx xx ……xx xx | CRC जाँच | - | |||
Note: The returned xx xx ……xx xx sensor data can be changed according to the register address and data length.
00 MM represents the register address of the sensor, and 00 NN is the data length.
| Register address(00 MM) | ||||||
| 00 00 | 00 01 | 00 02 | 00 03 | 00 04 | 00 05 | 00 06 |
| eCO2 | TVOC | CH2O | PM2.5 | आर्द्रता | तापक्रम | PM10 |
विवरण
- The minimum number of sensors 00 NN is 00 01, and the maximum is 00 07. When the MM value is 00, the maximum NN value can be 07. At this time, the value of all sensors can be read, and it can also be 01. When it is 01, only CO2 data can be read alone. And so on.
- The address at the front of the register can read the data of the following sensor when the data length is increased, but the address at the back of the register cannot read the data of the sensor before this address. See details below:
| ०० एमएम ०० एनएन | पढ्न सकिने वातावरणीय डेटा |
| ३५ ६७ ३५ ६७ | Indicates that CO2 data is read from the starting address 00 00 |
| ३५ ६७ ३५ ६७ | Means to read CO2, TVOC data from the starting address 00 00 |
| ३५ ६७ ३५ ६७ | Means to read CO2, TVOC, CH2O data from the starting address 00 00 |
| ३५ ६७ ३५ ६७ | Means to read CO2, TVOC, CH2O, PM2.5 data from the starting address 00 00 |
| ३५ ६७ ३५ ६७ | Means to read CO2, TVOC, CH2O, PM2.5, H data from the starting address 00 00 |
| ३५ ६७ ३५ ६७ | Means to read CO2, TVOC, CH2O, PM2.5, H, T data from the starting address 00 00 |
| ३५ ६७ ३५ ६७ | Means to read CO2, TVOC, CH2O, PM2.5, H, T, PM10 data from the starting address 00 00 |
| ३५ ६७ ३५ ६७ | Indicates that the TVOC data is read from the starting address 00 01 |
| ३५ ६७ ३५ ६७ | Indicates that TVOC and CH2O data are read from the starting address 00 01 |
| ३५ ६७ ३५ ६७ | Means to read TVOC, CH2O, PM2.5 data from the starting address 00 01 |
| ३५ ६७ ३५ ६७ | Means to read TVOC, CH2O, PM2.5, H data from the starting address 00 01 |
| ३५ ६७ ३५ ६७ | Means to read TVOC, CH2O, PM2.5, H, T data from the starting address 00 01 |
| ३५ ६७ ३५ ६७ | Means to read TVOC, CH2O, PM2.5, H, T, PM10 data from the starting address 00 01 |
| ३५ ६७ ३५ ६७ | Indicates that CH2O data is read from the starting address 00 02 |
| ३५ ६७ ३५ ६७ | Indicates that CH2O and PM2.5 data are read from the starting address 00 02 |
| ३५ ६७ ३५ ६७ | Means to read CH2O, PM2.5, H data from the starting address 00 02 |
| ३५ ६७ ३५ ६७ | Means to read CH2O, PM2.5, H, T data from the starting address 00 02 |
| ३५ ६७ ३५ ६७ | Means to read CH2O, PM2.5, H, T, PM10 data from the starting address 00 02 |
| ३५ ६७ ३५ ६७ | PM2.5 डेटा सुरुवाती ठेगाना ०० ०३ बाट पढिएको संकेत गर्दछ। |
| ३५ ६७ ३५ ६७ | सुरुवाती ठेगाना ०० ०३ बाट PM2.5, H डेटा पढ्ने माध्यम |
| ३५ ६७ ३५ ६७ | सुरुवाती ठेगाना ०० ०३ बाट PM2.5, H, T डेटा पढ्ने माध्यम |
| ३५ ६७ ३५ ६७ | सुरुवाती ठेगाना ०० ०३ बाट PM2.5, H, T, PM10 डेटा पढ्ने माध्यम |
| ३५ ६७ ३५ ६७ | H डेटा सुरुवात ठेगाना ०० ०४ बाट पढिएको संकेत गर्दछ। |
| ३५ ६७ ३५ ६७ | सुरुवाती ठेगाना ०० ०४ बाट H, T डेटा पढ्ने माध्यम |
| ३५ ६७ ३५ ६७ | सुरुवाती ठेगाना ०० ०४ बाट H, T, PM10 डेटा पढ्ने माध्यम |
| ३५ ६७ ३५ ६७ | यसले संकेत गर्छ कि T डेटा सुरुवात ठेगाना ०० ०५ बाट पढिएको छ। |
| ३५ ६७ ३५ ६७ | सुरुवाती ठेगाना ०० ०५ बाट T, PM10 डेटा पढ्ने माध्यम |
| ३५ ६७ ३५ ६७ | PM10 डेटा सुरुवात ठेगाना ०० ०६ बाट पढिएको संकेत गर्दछ। |
डेटाको फ्रेम कसरी पढ्ने
पूर्वका लागिample, if the address of the module is 0x01, the user needs to send 01 03 00 00 00 07 04 08 to read out seven kinds of sensor data.
The returned data format is as follows:
| बाइट[0] | बाइट[1] | बाइट[2] | बाइट[3] | बाइट[4] | बाइट[5] | बाइट[6] | बाइट[7] | बाइट[8] | - |
| हेडर | प्रकार्य कोड | डाटा लम्बाई | CO2 डाटा | TVOC डेटा | CH2O Data | - | |||
| ८x४० | ८x४० | 0x0E | CO2_H | CO2_L | TVOC_H का थप वस्तुहरू | TVOC_L | CH2O_H | CH2O_L | - |
| बाइट[9] | बाइट[10] | बाइट[11] | बाइट[12] | बाइट[13] | बाइट[14] | बाइट[15] | बाइट[16] | बाइट[17] | बाइट[18] |
| PM2.5 डाटा | आर्द्रता डाटा | तापक्रम डाटा | PM10 डाटा | CRC16 जाँच | |||||
| PM2.5_H को बारेमा | PM2.5_L को मूल्य | हम_एच | हम_एल | समय_एच | टेम_एल | PM10_H को बारेमा | PM10_L को मूल्य | CRC16_L | CRC16_H |
प्रत्येक सेन्सर डेटाको गणना विधि
CO2 (ppm) = CO2 _H * 256 + CO2 _L
TVOC(ug/m3) = (TVOC_H * 256 + TVOC_L) / 10
CH2O(ug/m3) = (CH2O_H * 256 + CH2O_L) / 10
PM2.5 (ug/m3) = PM2.5_H * 256 + PM2.5_L
PM10 (ug/m3) = PM10_H * 256 + PM10_L
Positive temperature (°C) = (Temperature _H * 256 + Temperature_ L) / 10
पूर्वका लागिample: T = (0 x 0110) / 10 = 272 / 10 = 27.2 ℃
ऋणात्मक तापक्रम (°C)
विधि १: सिधै साइन गरिएको इन्ट प्रकारमा रूपान्तरण गर्नुहोस्, उदाहरणका लागिample: T = 0 x ffbf / 10 = -65 / 10 = -6.5 ℃
Method 2: If greater than 0 x 7fff (32767)
Then it is a negative number T = (0 x ffbf – 65536) / 10 = (65471 – 65536) / 10 = -65 / 10 = -6.5 ℃
Humidity (%RH) = (Humidity _H * 256 + Humidity _L) / 10
पूर्वका लागिample: T = (0 x 02AD) / 10 = 685 / 10 = 68.5 %RH
Note: If user need to use mg/m3 as the unit, please convert it. The conversion formula is: 1mg/m3 =1000 ug/m3
The length of the CRC check byte is 17 (that is, the bytes of Byte[0]~Byte[16]), select A001 or 8005 in reverse order.
ध्यान दिनु पर्ने कुराहरु
- Avoid contact with organic solvents (including silica gel and other adhesives), paints, pharmaceuticals, oils and high-concentration gases.
- The module must not be subjected to excessive shock or vibration.
- व्यक्तिगत सुरक्षा समावेश प्रणालीहरूमा यो मोड्युल लागू नगर्नुहोस्।
- बलियो हावा संवहन वातावरणमा मोड्युल स्थापना नगर्नुहोस्।
CRC जाँच गणना विधि
Function function: CRC check function, generate CRC
Parameter description: arr_ buff: array set to be verified
len: The length of the data to be verified
Return parameter: CRC is an unsigned int type, the high byte is the high byte in front, and the low byte is in the back unsigned int CRC_ Compute ( unsigned char *arr_ buff, unsigned char len)
{
unsigned int crc=0xFFFF;
हस्ताक्षर नगरिएको चार i, j;
for ( j=0; j <len;j++)
{
crc=crc ^*arr_buff++;
for ( i=0; i<8; i++)
{
if( ( crc&0x0001) >0)
{
crc=crc>>1;
crc=crc^ 0xa001;
}
अरू
crc=crc>>1;
}
}
return ( crc);
}
कागजातहरू / स्रोतहरू
![]() |
L-com SRAQ-D701 मल्टिफंक्शन एयर क्वालिटी सेन्सर मोड्युल [pdf] प्रयोगकर्ता गाइड SRAQ-D701, SRAQ-D701 मल्टिफंक्शन एयर क्वालिटी सेन्सर मोड्युल, मल्टिफंक्शन एयर क्वालिटी सेन्सर मोड्युल, एयर क्वालिटी सेन्सर मोड्युल, सेन्सर मोड्युल |
