Lambda CS-3000 शृङ्खला कर्भ ट्रेसर
निर्दिष्टीकरणहरू
- Model: Curve Tracer CS-3000 series (CS-3100, CS-3200, CS-3300)
- Collector Supply (HV Mode): Max.Peak voltage – 3 kV, Max. Peak current – 15 A, Max. peak power – 390 W
- Collector Supply (HC Mode): Max.PPeakvoltage – 30 V, Max. peak current – 7.5 A, Pulse width – 50 us to 400 us
- Step Generator: Step rate – 1/10 Step, Pulse width range – 50 us to 400 us
- मापन: सङ्कलक भोल्युमtage range – HV: 50 mV/div to 500 V/div, HC: 50 mV/div to 5 V/div
उत्पादन उपयोग निर्देशन
कलेक्टर आपूर्ति
For HV mode, set the max. Peak voltage and current according to the specifications. For HC mode, adjust the settings as needed.
चरण जेनरेटर
Set the step rate and pulse width within the specified ranges for accurate measurements.
मापन
उपयुक्त कलेक्टर भोल्युम प्रयोग गर्नुहोस्tage range based on the mode of operation for precise readings.
Ideal for measuring the characteristics of various semiconductors such as IGBTs, MOSFETs, transistors, and diodes etc.
- अधिकतम शिखर भोल्युमtage 3,000V (high voltagई मोड)
- Maximum peak current 1,000A (CS-3300 high current mode)
- All models equipped with LEAKAGE mode (1pA cursor resolution)
- USB port to save screen data and setup data
- Equipped with La LAN interface for remote control
Easy-to-understand measurement screen
CS-3000 Series Specifications
Collector supply HV mode
| मोडेल | CS-3100-300V * 2 | CS-3100 / CS-3200 / CS-3300 | |||
|---|---|---|---|---|---|
| मोड/ध्रुवीयता | Full wave rectification/ + – , DC/ + – , LEAKAGE/ + – , AC | ||||
| अधिकतम शिखर भोल्युमtage | 300V | 30V | 3kV | 300V | 30V |
| अधिकतम शिखर वर्तमान (maximum peak pulse current * 1 ) |
750mA (1.5A * 1 ) |
०,३२ए (15A * 1 ) |
75mA (150mA * 1 ) |
750mA (1.5A * 1 ) |
०,३२ए (15A * 1 ) |
| अधिकतम शिखर शक्ति | 120mW / 1.2W / 120W / 390W (Cannot be set when using the maximum peak voltage of 3kV) | ||||
| Horizontal axis range | 50mV～500V/div | ||||
- The maximum instantaneous current value that can be generated (varies depending on the target to be measured and conditions), the measurement should be less than or equal to the maximum peak current value.
Collector supply HC mode
| मोडेल | CS-3100 / CS-3100-300V * 2 | CS-3200 | CS-3300 | |||
|---|---|---|---|---|---|---|
| मोड/ध्रुवीयता | Not equipped with HC mode | Pulse/ + – | ||||
| अधिकतम शिखर भोल्युमtage | 40V | |||||
| अधिकतम शिखर वर्तमान | ०,३२ए | ०,३२ए | ०,३२ए | ०,३२ए | ०,३२ए | |
| अधिकतम शिखर शक्ति | १० किलोवाट | 400W | १० किलोवाट | १० किलोवाट | 400W | |
| पल्स चौडाइ | Pulse width is variable at 50µs to 400µs (10µs resolution) | |||||
| मापन बिन्दु | The measurement point can be specified (10µs resolution) | |||||
| Vertical axis range | 100mA～50A/div | 100mA～100A/div | ||||
| परीक्षण स्थिरता | CS-301 | CS-302 | ||||
सामान्य विनिर्देशहरू
| Loop correction | हार्डवेयर | Correction ofthe floating capacitance between the collector supply and the ground | |
| सफ्टवेयर | Pseudo-looping through software optimisation | ||
| स्टेप जेनेरेटर | अफसेट | सेटिङ दायरा | -10 ～ +10 x STEP AMPLITUDE Setting |
| संकल्प | 1% of the STEP AMPLITUDE setting | ||
| वर्तमान मोड | दायरा | 50nA to 200mA per step, 21 steps, 1-2-5 switching | |
| अधिकतम वर्तमान | 2A | ||
| अधिकतम भोल्युमtage | 10V वा बढी | ||
| भोल्युमtage मोड | दायरा | 50mV to 2V per step, 6 steps, 1-2-5 switching | |
| अधिकतम वर्तमान | 500mA～(～8V), 200mA～(～15V), 10mA～(～40V) | ||
| अधिकतम भोल्युमtage | ±40V | ||
| चरण दर | 2x 50Hz or 60Hz (1x in AC mode), pulse interval in HC mode | ||
| पल्स स्टेप | पल्स चौडाइ | 50µs～400µs (10µs step) When in HC mode, the pulse width is 100µs wide before and after the pulse of the collector supply |
|
| चरणहरूको संख्या | 0～20 Step | ||
| AUX आउटपुट | दायरा | OFF, -40V～+40V (Variable in 100mV steps) | |
| मापन मोड | दोहोर्याउनुहोस्, रोक्नुहोस्/एकल गर्नुहोस्, स्वीप गर्नुहोस् | ||
| ठाडो अक्ष (full scale 10div) |
कलेक्टर वर्तमान | दायरा | HV mode：1µA/div to 2A/div, 20 steps 1-2-5 switching (HC mode is not included) |
| शुद्धता | 2% + 0.05 x VERT/div of readout To this, add the loop correction error for the following maximum peak voltages 0.5µA(30V), 1µA(300V), 6µA(3kV), 12µA(5kV) Specify at least 10% of the maximum peak voltage for 30V, 300V, and 3kV, and at least 30% for 5kV |
||
| उत्सर्जन गर्ने वर्तमान (LEAKAGE) |
दायरा | 1nA/div～2mA/div, 20 step 1-2-5 switching (Collector supply mode is LEAKAGE) |
|
| शुद्धता | 2% + 0.05 x VERT/div + 1nA or less of readout | ||
| तेर्सो अक्ष (full scale 10div) |
कलेक्टर voltage |
दायरा | HC mode：50mV/div to 5V/div, 7 steps 1-2-5 switching (HV mode is not included) |
| शुद्धता | 2% + 0.05 x HORIZ/div or less of readout | ||
| Base/ उत्सर्जन गर्ने voltage |
दायरा | 50mV/div~5V/div, 7 step 1-2-5 switching | |
| शुद्धता | 2% + 0.05 x HORIZ/div or less of readout | ||
| प्रदर्शन | प्रदर्शन | -.। इन्च TFT LCD | |
| डेटा बिन्दुहरूको संख्या | 1,000 points/trace (AC, full wave rectification) 20～1,000 points/trace (SWEEP mode) |
||
| Trace display | Point interpolation display, dot display | ||
| औसत | OFF, 2 to 255 times | ||
| दृढता | OFF, SHORT, LONG, Infinite length | ||
| Save internal waveform (REF) | --प्यानल | ||
| कर्सर | DOT | Vert, Horiz, β or gm | |
| fLINE | Vert, Horiz, 1/grad, intercept | ||
| नि:शुल्क | Vert, Horiz, β or gm | ||
| विन्डो | Vert, Horiz, β or gm in the WINDOW area | ||
| Data save/read | मेमोरी | Setup：256 pcs, REF：4 screens | |
| बाह्य मेमोरी | USB1.1：Setup, waveform, screen hardcopy (BMP, TIFF, PNG) | ||
| रिमोट | Equipped with a remote 10BASE-T/100BASE-TX 1 port via LAN connection | ||
| बिजुली आपूर्ति | AC100～240V 50/60Hz, Maximum operating power：500VA (400W), Standby：50VA (7W) | ||
| External dimensions(mm) वजन |
CS-3100 / CS-3100-300V * 2 | Approx. 424W x 220H x 555D (excluding protrusions and accessories) approx. 28kg (excluding accessories) |
|
| CS-3200, 3300 | Approx. 424W x 354H x 555D (excluding protrusions and accessories) approx. 43kg (excluding accessories) |
||
CS-3100-300V is a made-to-order product.
मानक सामान
| CS-500 परीक्षण एडाप्टर | |
|---|---|
 |
This is a jig for connecting the part to be measured, provided by the customer, and the fixture. (Standard accessories) |
FAQs
प्रश्न: यदि पल्स चौडाइ धेरै साँघुरो छ भने मैले के गर्नुपर्छ?
A: If the pulse width is narrow, adjust the settings to widen it within the allowable range to generate the max. peak voltage.
प्रश्न: कलेक्टर आपूर्ति आउटपुट कसरी क्यालिब्रेट गर्ने?
A: The collector supply output can be calibrated by enabling/disabling the output and adjusting the floating capacity as per the instructions provided.
कागजातहरू / स्रोतहरू
 |
Lambda CS-3000 शृङ्खला कर्भ ट्रेसर [pdf] निर्देशन पुस्तिका CS-3100, CS-3200, CS-3300, CS-3000 शृङ्खला कर्भ ट्रेसर, कर्भ ट्रेसर, ट्रेसर |