PRODVX APPC-10XPL Poe LED एन्ड्रोइड टच डिस्प्ले प्रयोगकर्ता गाइड

सामग्रीहरू बक्सबाट बाहिर निकाल्नुहोस् र सबै कम्पोनेन्टहरू उपस्थित छन् भनी सुनिश्चित गर्नुहोस्।
Install the wall/glass mount or desk stand following the designated mount/stand manual instructions. Use a manual screwdriver instead of power tools to prevent damage to the device.

Connect the device to power via PoE+ or a power adapter (optional accessory).
LAN वा Wi-Fi मार्फत इन्टरनेटमा जडान गर्नुहोस्।
तपाईंको उत्पादन वातावरणको लागि ProDVX उपकरण कन्फिगर गर्नुहोस्।

यो प्याकेज समावेश गर्दछ

कसरी सुरु गर्ने

चरण १: Take the contents out of the box, and make sure all components are present.

चरण १: Install the wall/glass mount or desk stand, and check the designated mount/stand manual for instructions. We strongly advise using a manual screwdriver instead of power tools due to the risk of causing damage to the device.
चरण १: PoE+ वा पावर एडाप्टर (वैकल्पिक सहायक) मार्फत पावरमा जडान गर्नुहोस्।

चरण १: LAN वा Wi-Fi मार्फत इन्टरनेटमा जडान गर्नुहोस्।
चरण १: तपाईंको उत्पादन वातावरणको लागि ProDVX उपकरण कन्फिगर गर्नुहोस्।

IOverview

Start and configure the ProDVX device.

चरण 1: पावर अन
Power on the device by connecting either: PoE+ cable or a Power adapter
चरण १: प्रारम्भिक कन्फिगरेसन
निम्न कन्फिगरेसन विधिहरू मध्ये एक छान्नुहोस्:
- A. Skip Wizard
  All configuration elements and additional features will remain in their disabled/default state.
- B. Network Setup
  - Configure the Network connection from the start.
  - नोट: Ethernet connection must be disabled to use Wi-Fi.
- C. Upload Configuration
  Upload a pre-defined configuration in JSON format.
- D. सुरु विजार्ड
  - Proceed through the wizard to configure ProDVX features.
  - Set screen sleep interval, or Default for automatic sleep after 30 minutes of inactivity (EcoDesign).
Step 3: Apply Configuration
Once the configuration is complete, the device will automatically reboot to apply the changes.

Step 4: Additional Setup (if applicable)
- Configure IEEE 802.1X for LAN or Wi-Fi connection.
- मनपर्ने अनुप्रयोगहरू स्थापना र कन्फिगर गर्नुहोस्।

वैकल्पिक सामान

एफसीसी नोट

सावधानी:
Please note this product contains a battery. Please return the product to a certified repair center for proper replacement of the battery. Disposal of a battery can be dangerous.
चेतावनी:
यस इकाईमा परिवर्तन वा परिमार्जनहरू अनुपालनको लागि जिम्मेवार पक्षले स्पष्ट रूपमा अनुमोदन नगरेकोले उपकरण सञ्चालन गर्ने प्रयोगकर्ताको अधिकारलाई बेवास्ता गर्न सक्छ।
नोट:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area can cause harmful interference, in which case the user will be required to correct the interference at his own expense.
यो यन्त्रले FCC नियमहरूको भाग १५ को पालना गर्छ। सञ्चालन निम्न दुई सर्तहरूको अधीनमा छ:

यो यन्त्रले हानिकारक हस्तक्षेप नगर्न सक्छ
यो यन्त्रले अवांछित सञ्चालनको कारण हुन सक्ने हस्तक्षेप सहित प्राप्त कुनै पनि हस्तक्षेप स्वीकार गर्नुपर्छ।

युरोप/युके – EU/UK अनुरूपताको घोषणा
This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove the presumption of conformity with the essential requirements of the Radio Equipment Directive. This equipment is compliant with Class A of EN55032. In a residential environment ment this equipment may cause radio interference.

यस उत्पादन को सही निपटान।

यो मार्किङले यो उत्पादनलाई अन्य (घरेलु) फोहोरसँग फाल्नु हुँदैन भनी संकेत गर्छ। अनियन्त्रित फोहोर विसर्जनबाट वातावरण वा मानव स्वास्थ्यमा हुने सम्भावित हानिलाई रोक्न, भौतिक स्रोतहरूको दिगो पुन: प्रयोगलाई प्रवर्द्धन गर्न जिम्मेवारीपूर्वक पुन: प्रयोग गर्नुहोस्। तपाईंको प्रयोग गरिएको यन्त्र फिर्ता गर्न, कृपया फिर्ता र सङ्कलन प्रणाली प्रयोग गर्नुहोस् वा उत्पादन खरिद गरिएको रिसेलरलाई सम्पर्क गर्नुहोस्। तिनीहरूले यो उत्पादन पर्यावरण सुरक्षित रिसाइकिलिंगको लागि लिन सक्छन्।
FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC & CE’s RF exposure guidelines, place the product at least 20cm from nearby persons.”

The suitable temperature for the ProDVX Display and accessories is 0°C-40°C. Please note that using the device at temperatures above or below the specified range is not permitted.

FAQ

यदि यन्त्र धेरै तातो हुन्छ भने मैले के गर्नुपर्छ?

Make sure the device is mounted correctly on a wall or surface as recommended. Avoid using it on a flat horizontal surface to prevent heat entrapment.

How can I dispose of the battery in the product?

Please return the product to a certified repair center for proper replacement of the battery. Battery disposal can be dangerous and should be handled with care.

Can I use power tools to attach the device to the mount or stand?

It is preferred not to use power tools as they may cause damage to the device. Please use a manual screwdriver for installation.

कागजातहरू / स्रोतहरू

PRODVX APPC-10XPL Poe LED एन्ड्रोइड टच डिस्प्ले [pdf] प्रयोगकर्ता गाइड
APPC-10XPL Poe LED एन्ड्रोइड टच डिस्प्ले, APPC-10XPL, Poe LED एन्ड्रोइड टच डिस्प्ले, एन्ड्रोइड टच डिस्प्ले, टच डिस्प्ले

सन्दर्भहरू

प्रयोगकर्ता पुस्तिका

PRODVX APPC-10XPL Poe LED एन्ड्रोइड टच डिस्प्ले

उत्पादन निर्दिष्टीकरण

उत्पादन उपयोग निर्देशन