रोथ क्विकटेम्प कम्प्याक्ट प्रणाली स्थापना गाइड

Roth QuickTemp Compact System Installation Guide

रोथ-लोगो

रोथ क्विकटेम्प कम्प्याक्ट प्रणाली

Roth-QuickTemp-Compact-System-Product

उत्पादन निर्दिष्टीकरण

  • आयामहरू: ८८ सेमी x ८३.५ सेमी x २२ सेमी
  • अधिकतम भार: २ मिमी प्रति मिटर
  • विधानसभा आवश्यक छ

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)भुइँको तल भ्याकुम गर्नुहोस्। Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

प्लेटहरू बीचको खाँचोहरू मिलाएर राख्नुपर्छ।

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

फिड पाइपहरूको लागि/खाली ठाउँहरू भर्न ट्रान्सफर प्लेटहरू प्रयोग गर्नुहोस्।

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

पाइपलाई पालैपालो भित्री घेरामा कसिलो/नजिक राख्नुहोस्।

Roth-QuickTemp-Compact-System-Fig- (11)

पाइपहरू जडान गर्नुहोस् र चाप परीक्षण गर्नुहोस्।

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

स्थापना चरणहरू

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. स्थिरता जाँच गर्नुहोस् र आवश्यक भएमा समायोजन गर्नुहोस्।
  8. तपाईंको उत्पादन अब प्रयोगको लागि तयार छ!

FAQs

उत्पादन को अधिकतम लोड क्षमता के हो?

The maximum load capacity is 2mm per meter.

के मलाई सभाको लागि कुनै अतिरिक्त उपकरण चाहिन्छ?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

के उत्पादन भण्डारणको लागि पृथक गर्न सकिन्छ?

Yes, the product can be disassembled following the reverse order of the installation steps.

कागजातहरू / स्रोतहरू

PDF thumbnailक्विकटेम्प कम्प्याक्ट प्रणाली
Installation Guide · QuickTemp Compact System, QuickTemp, Compact System, System

एउटा प्रश्न सोध्नुहोस्

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

एउटा प्रश्न सोध्नुहोस्

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.